Page 3 of 3
Re: Memcal VR V6 installed
Posted: Thu Oct 28, 2021 4:57 pm
by Pete30nz
Hi,
Yes once i can get it to download, i will name and save it.
The photos in the last message was as fas as i could get. And it was taking about 5 minutes or more to get to each retry stage.
How long does it usually take to download the Bin?
There must be some thing I'm not doing 100% correct.
Any ideas?
Cheers
Pete
Re: Memcal VR V6 installed
Posted: Fri Oct 29, 2021 7:14 am
by Charlescrown
I think it took around a minute to get the bin file. I'll have a look at the settings I am using and post back later today.
Re: Memcal VR V6 installed
Posted: Fri Oct 29, 2021 9:51 am
by Charlescrown
Under user preferences I have to following settings
High speed coms read and write set to AUTO
Auto retries 5
General program options all ticked except for Flash PCM
ECM com port empty
Baud rate 8192
Wait for silence 50
Com retries 10
Com timeout 300
Device ID F4
BCM device BD
Heart beat 0x08.0x55.0xA3
Heartbeat timeout 2000
Tick disable chatter, ignore echo, silence on connect
Logger Mode ALDL
Re: Memcal VR V6 installed
Posted: Sat Oct 30, 2021 5:50 am
by Pete30nz
Hi
I'll try this later this morning, and post back.
Cheers for the info
Edit: photo attached of the setting I had the other day.
No time today, hopefully tomorrow
Pete
Re: Memcal VR V6 installed
Posted: Sun Oct 31, 2021 9:19 am
by Pete30nz
Afternoon
i have just grabbed my Bin off the VR memcal ECM and saved it.
I'm unsure how to look at it? I'm guessing Tunerpro some how.
cheers
Pete