Reverse Engineering ME7.4.4 as a stand alone ECU

Bosch Motronic etc ECUs and PCMs
Post Reply
1gcrazy
Posts: 5
Joined: Fri Feb 23, 2018 7:19 am

Re: Reverse Engineering ME7.4.4 as a stand alone ECU

Post by 1gcrazy »

Was there every any progress on this project? It looks VERY interesting!
Top
BennVenn
Posts: 533
Joined: Fri Mar 04, 2016 10:35 am
cars: R33 GTST, '60 Vw Bug, Express (4G63T), GW X200
Location: Windellama, NSW
Contact:
Contact BennVenn

Re: Reverse Engineering ME7.4.4 as a stand alone ECU

Post by BennVenn »

Yeah quite a bit, I've added a lot to the code but not much recently, there are a few people in our discord that are using it too modified for their own builds, different trigger wheel patterns, drive by wire etc
Top
User avatar
AngelMarc
Posts: 198
Joined: Sat Apr 08, 2023 9:23 pm
cars: A CB450 running to 8,000RPM with a P59.

Re: Reverse Engineering ME7.4.4 as a stand alone ECU

Post by AngelMarc »

How much info is there for coding these from scratch?
Don't stress specific units.
Top
MPC001
Posts: 32
Joined: Sat May 05, 2018 9:41 pm

Re: Reverse Engineering ME7.4.4 as a stand alone ECU

Post by MPC001 »

BennVenn wrote: ↑Sat May 10, 2025 4:48 pm Yeah quite a bit, I've added a lot to the code but not much recently, there are a few people in our discord that are using it too modified for their own builds, different trigger wheel patterns, drive by wire etc
Awesome work & achievement 👍😎
Top
Post Reply

Return to “Bosch ECUs”