pcmhacking.net

Version 3.0 is live on my Patreon. I know I'll never recoup all of time I've spent on this, but I figured I would try and limit the amount of people using it in case there were issues with it.

There are a couple difficulty's with using it as PCM Hammer Version 21 doesn't like the new OSID so Version 20 must be used.

Also Universal Patcher has problems for the same reason, so hopefully that can be updated to allow segment swaps between my custom OS and standard 12587603 segments.

bubba2533 wrote:

kojab wrote:Have a problem with the 3 BAR "Open Loop EQ'' table. It is not seeing any boost. Tried "slowtahoe's" Custom 2 BAR bin on my test bench and it seems to have the same problem.

I'm not sure what you mean by not seeing any boost. Can you explain what you are doing?

Sorry I should have spent more time before posting my findings posted above which are probably incorrect.

22/09/2022

Going to put the 3 BAR Open Loop EQ table into RTLS1 and do a few logs on the road and see what it's doing. Should have done this before as bench testing has it's limits.

Getting close to 20 PSI boost now so this Open Loop EQ table is vital. Will report back.

27/10/2022

3 BAR "Open Loop EQ'' table working fine. Thank you again Bubba for getting your Boost OSs to run with the RTLS1.

Subscribed on Patreon. Thanks for all the hard work!

Also subscribed!

Broke4speed wrote:Subscribed on Patreon. Thanks for all the hard work! :)

hsv08 wrote:Also subscribed!

Thanks a lot! It makes me feel like all that time I put in was worth it.

bubba2533 wrote:

Broke4speed wrote:Subscribed on Patreon. Thanks for all the hard work!

hsv08 wrote:Also subscribed!

Thanks a lot! It makes me feel like all that time I put in was worth it.

I haven't got my setup running successfully yet, but with some time I'm.sure I will. I just love the direction it's going and the functions it makes available. Great work

So i am trying to edit a 156 bin file, but it doesn't want to save after the fist edit. I feel there is a checksumming issue or something. Anybody able to help? Been hanging out to try the Boost OS but i can seem to edit the base file and then save with the XDF im using to even get to the stage of using the patched XDF.
Thats the XDF.

I spent 3 hours today editing only to get to the stage where it failed to save.

also wont save with the Boost 2.1 XDF.

Have added the .dll files to all locations of tunerpro

Attach the bin file you are using as well.

Will do tonight.
I'm using a file from on here, open with HPTuner, swap all the calibration data from a good tuned file I have for our cars here. Convert back to a bin file, open back up with Tunerpro, and try to save any changes made with tunerpro and it fails to save. I wonder if HPTuner is injecting code somewhere and screwing it as a bin file?

i would try and isolate just making changes to a standard bin with tunerpro to make sure you have a working setup and then go from there.