pcmhacking.net

Hi mate,

I updated the logger to V113, using the same ADX as above, but now I seem to have lost the ECT and IAT temp data? Just showing as -40 degrees on the live display.

Was previously running V111. Not sure if I need to alter anything in the ADX file to suit the later firmware?

Thanks

edit: also not getting any data playback in tunerpro?

Datalog and ADX attached.

OK, figured out why the temp data stopped working, problem with the calcs, had to change equations to basic maths and get rid of the brackets etc.

Now to figure out why the logs aren't displaying any data.

In the included instructions on page 37 there are two things you need to change, the second one will fix your issue.

Cheers mate.

I'll add 2 bytes to the payload and body size settings and see what happens.

I thought it had been done earlier when I upgraded to V111 but maybe I was mistaken?

Just to confirm. It's the original ADX Data Process payload size +26 bytes for aux data to body and payload size and then +2 bytes to each for the later version firmware for the digital flags.

Looks like I've made a maths error as it looks like I did +26 and +1 byte to each looking at the original ADX with the enhanced tune from The1

edit: just waiting for the missus to come home with the car.

Stock is 70/67 for engine data, add 26 and you need 96/93.

There is no header search like the enhanced ADX uses, the logger does this automatically behind the scenes.

We have data

Right. I'm with you now. For some reason I was thinking 26 + 2 when the original V110 was 24 bytes not 26

Help! I don't use my logger often enough and I have got very confused. First thing I think my program is 12P version 112 but not sure (complicated story computer crashed and lost a lot of data) it's Program ID 0012, Major version 01, Minor Version 01 and Build Version 02. The next part of the saga is I can't find the correct logging file for my logger. The car is running 3 bar setup.

yes your correct its v1.12 ... go to the $12P section and download the complete $12P zip file, that should have a 3 bar adx in it which should sort you out.

Tnx I have done that and will give it a go tomorrow or Sunday depending on the temp. It's 47 here at the moment and all I want is reference.