Page 27 of 96
Re: Enhanced Factory Bins
Posted: Wed Oct 23, 2013 2:39 pm
by tav
You can source the genuine Delphi LS6 MAF's here in Australia (3 Grey Hot Wire style, not the 2 hot wire / 1 diode knock off).
The only thing is though... GM used them for a very limited time in aus... making them extremely hard to come by. They can be found on 05 model VZ LS2 engines.
Re: Enhanced Factory Bins
Posted: Wed Oct 23, 2013 2:42 pm
by The1
good to know
Re: Enhanced Factory Bins
Posted: Mon Oct 28, 2013 8:58 am
by The1
posted up VX/VY N/A flash bins with the revised MAF tables
Also posted up new version of general info pdf fixed missing digit from LS6 MAF part number and included warning about fake maf's and how to check.
Also of note i will be in testing soon on vehicle for the LS7 Card MAF, a pipe is being made up now to mount it in, tests on the bench we have no issues reaching 15,000hz, the card maf's are cheaper than LS6 MAF's but have the issue of loom cables and pipe to mount it in, but if the tests are successful depending on interest we might be able to get looms made up and pipes fab'd, so if your interested let us know here for future numbers.
Re: Enhanced Factory Bins
Posted: Mon Oct 28, 2013 11:38 am
by yoda69
Re: Enhanced Factory Bins
Posted: Mon Oct 28, 2013 11:56 am
by The1
looks good, they have $16 postage and discounts on post for multiples
Re: Enhanced Factory Bins
Posted: Fri Nov 01, 2013 6:00 am
by trikky73
looking forward to hearing how this goes, going to hold off ordering my LS6 MAF till you give the card MAF a run in a car
Re: Enhanced Factory Bins
Posted: Mon Nov 04, 2013 6:38 pm
by stevedarman
Hi there,Iam trying to burn the enhanced vx bin I am using the Moats Burn2 with a 29F040 chip
I cant get it to run in my car I have a vx s/c
I think it may be chip and buffer address
I have chip add set to 060000- 07FFFF
and buffer set to 000000 - 01FFFF
ca some one confirm i have this right?
Thanks
Re: Enhanced Factory Bins
Posted: Mon Nov 04, 2013 7:36 pm
by VL400
The easiest way is prob to just use TunerPro and the bin stacking tool. Press F5 or its under the Tools menu.
Set the bin size to 128KB and chip size to 512KB. Load the bin 4 times and load/burn in the Burn2 with 0 offset.
Re: Enhanced Factory Bins
Posted: Tue Nov 05, 2013 9:10 am
by stevedarman
Thanks that got it working.
now i cant get tuner pro to connect . the cable i have is a usb i got off ebay a few years ago
it works fine with the vp-vr commodores.
In the pc device manager it is all ok on com4.
in tunerpro preferences it tests ok when the aldl is not plugged in but when i plug aldl into the car
it says not found
can you help me here?
Re: Enhanced Factory Bins
Posted: Tue Nov 05, 2013 12:52 pm
by The1
sounds like you have an old adaptor, you'd need one like this.
http://pcmhacking.net/forums/viewtopic.php?f=14&t=622