pcmhacking.net

certainly a labour of love there

Love or obsession? hard to distinguish between the 2 sometimes

neither, its necessity. Gota fix up those fuck ups by the lazy ass factory workers and that bastard called entropy.

Would anyone happen to have documents on dealer fitted cruise control kits? I have one retrofit harness which requires a 20mm hole to be punched in the firewall but I don't know where the factory location for this hole should be. Looked at a number for spots but seems like either cables will be too short or something is in the way/can't drill a pilot hole for the metal punch.

Only spot I have found is next to the accelerator pedal with wires almost touching the lever up top as there is almost no room the pedal and the side wall.

yes mate. i have that document from my original VN, guessing it would be the same. i have no idea where the documents are but i know i scanned them and put them online.

they are also here https://forums.justcommodores.com.au/th ... ol.120839/ see post 13.

Those attachments are unreadable just about, any bigger ones?

Attached are for VT, not sure how different the setup was for VN, but thought maybe of some use. Couldn't find anything for VN-VS on the accessory kit.

psyolent wrote:they are also here https://forums.justcommodores.com.au/th ... ol.120839/ see post 13.

Wow, never been quoted before

Hopefully the attachment is easier to read.

Thanks, that better. hmm there is nothing in there about where to punch the hole in the firewall.