Re: ALDL Logger V2
Posted: Wed Feb 07, 2018 5:20 pm
so am i reading right these awsome little bits of kit are no longer available
?
?
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
What changes were required to get it to work on the VY?VL400 wrote:The VX one suits VY too, its the VY listen ADX that differs to VX as the dash data changes between models.
I have been talking to OZ38 on PM about this issue yesterday. Have tested the VX ADX on my software ALDL simulator program with a VY vehicle and VY PCM, and also a VT/VX/VY bench with PCM, cluster and BCM. It connects and logs ok but wont on his vehicle. Same with the listen ADX, works on the bench but wont on his car. Have asked OZ38 for the debug file from the logger, it may have some more clues as to what is going on if there is an ADX issue. Will get to the bottom of it!
Keen to hear the answer to this also, i had issues with my V1 logger in my VYejukated wrote:
What changes were required to get it to work on the VY?
Yeah there are no more available. I use a Logger V3 in my own car and may make these available in the future but it is fairly different to the V2 - no screen, no real user interface other than a single button and RGB LED, it is a permanent install logger that just automatically records.dusto wrote:so am i reading right these awsome little bits of kit are no longer available
?
Working great now on the VY V6.VL400 wrote:I have updated the zip file in the first post with the modified ADX VX_DualA.adx.
The changes were to reduce the silence search to 15ms (was 50ms) and increase the delay between logging messages to 10ms (was 3ms)