Delco OSE FlashTool V1.51
Re: Delco FlashTool V1.51
Also hptuners will connect fine with pcms and so will tazzis SOE, advanced diagnostics and his cluster reprogramming software.
I don't think it the laptop as it's connected to plenty of vehicles without a issue using other software. This cable does get used for tazzis software and havent had a issue with it (except one VZ clubby which I think is a module problem)
I don't think it the laptop as it's connected to plenty of vehicles without a issue using other software. This cable does get used for tazzis software and havent had a issue with it (except one VZ clubby which I think is a module problem)
- antus
- Site Admin
- Posts: 8272
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Delco FlashTool V1.51
It could be borderline signal signal quality and the cable. Is the cable one of ours?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 2906
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Delco FlashTool V1.51
I know we don't like old versions floating around but just for shits & giggles do you want to try this version as I've found it the best to connect to the flash PCM's on bench or in car.
- Attachments
-
- OSE Enhanced Flash Tool V141(test).exe
- (523.5 KiB) Downloaded 464 times
Re: Delco FlashTool V1.51
Think its one of mine.antus wrote:It could be borderline signal signal quality and the cable. Is the cable one of ours?
I recon its a computer speed/timing not quite up to scratch like VL mentioned. If Im not mistaken, flashtool searches for at least 25ms of silence after a heartbeat? If the laptop isnt fast enough to record this then could be causing dramas?
Mine finds the heartbeat and instantly sends a request, it doesnt wait for any silence so could be why thats no dramas there.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Delco FlashTool V1.51
Yea cable is one of yours. Brought it about 6 months ago from the1antus wrote:It could be borderline signal signal quality and the cable. Is the cable one of ours?
Re: Delco FlashTool V1.51
Thanks I was trying to find my old versions but couldn't. I'll give that a go.VX L67 Getrag wrote:I know we don't like old versions floating around but just for shits & giggles do you want to try this version as I've found it the best to connect to the flash PCM's on bench or in car.
Re: Delco FlashTool V1.51
The aldl cable isn't your one tazzi. The elm is thoughTazzi wrote:Think its one of mine.antus wrote:It could be borderline signal signal quality and the cable. Is the cable one of ours?
I recon its a computer speed/timing not quite up to scratch like VL mentioned. If Im not mistaken, flashtool searches for at least 25ms of silence after a heartbeat? If the laptop isnt fast enough to record this then could be causing dramas?
Mine finds the heartbeat and instantly sends a request, it doesnt wait for any silence so could be why thats no dramas there.
Laptop is a Dell Latitude E5420 Core i5 2.5Ghz 4GB 320GB it's a lot faster then what I did have for tuning ( Sony vaio notebook 1.5ghz 2gb ram and junked up.)
-
- Posts: 2906
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Delco FlashTool V1.51
Your using a ELM cable to use flashtool?
Re: Delco FlashTool V1.51
Ok just tryed v141 and still same problem.hsv08 wrote:Thanks I was trying to find my old versions but couldn't. I'll give that a go.VX L67 Getrag wrote:I know we don't like old versions floating around but just for shits & giggles do you want to try this version as I've found it the best to connect to the flash PCM's on bench or in car.
No I'm using a aldl. I was referring to tazzi when he said thinks I have his lead.VX L67 Getrag wrote:Your using a ELM cable to use flashtool?
I have the vaio on charge to give that ago aswell. Will try both version of flashtool.
At this stage it's looking like cable or car?
I don't have any friends that have v6's though to try a different vehicle, they all have V8s which require ELM or HPT
Re: Delco FlashTool V1.51
Hmm... thats really odd...
Especially if its on the bench... so nothing else would be communicating right.. seems like a true 'wtf' situation.
Especially if its on the bench... so nothing else would be communicating right.. seems like a true 'wtf' situation.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726