Can I ask maybe a stupid question?
With the plug pinouts between the VR Auto and the VR manual above, why is the serial data ommitted from pin A8 for the ECM and pin C11 from the PCM?
Is this critical for the wiring loom conversion or not needed if the security is omitted from the memcal.
Thanks.
VR AUTO TO 808 ECU
-
muttley383
- Posts: 83
- Joined: Mon Aug 24, 2009 10:21 am
- cars: VR 383 stroker
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: VR AUTO TO 808 ECU
I think delcowizzid was using a VN/VP '808 so there was no 8192baud ALDL data. But if using a genuine VR manual ECU in a VR auto then you can connect the data line up and have the BCM operate the security like normal - can connect it on a '808 too but it wont do anything, and yeah will need to disable VATS in that case.
-
delcowizzid
- Posts: 5627
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VR AUTO TO 808 ECU
i was to lasy to end up repinning the loom so just fitted a vp loom this weekend so easy its not funny now running on 60lb injectors and 808 ecu just have to fit the new kitted T700 and shes driving 808 style 
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem