FS: NVRAM ECM Conversion (VN to VS but not VS Ecotec)

[MathiaSKoeniG]

Hi Guys,
just wondering a few things about these,
I am about to supercharge my Vr v6 auto, I will be running a toyota sc14 at 3psi boost , already have all the parts, the only thing stopping me is the tune,
mainly i am wondering if these would be capable of tuning for boost on an old Vr and if so what program would be best to do so, I have some very basic experience with Efilive but basically i want something with either a simple to use GUI or something with loads of research material on it, if i can get something like that or you guys could point me in the right direction I would love to buy one of these and tune the old beast myself,
The other thing i am wondering is if i get a Bin file for the Vr Auto, tune it up to spec and later get a Manual conversion, will i be able to swap this to a manual ecu without too much drama??
Thanks guys

[VL400]

Currently the vr auto bin does not support boost. You might be able to fudge it a bit for 3psi.


If you download tuner pro (www.tunerpro.net) you can get an xdf to see what is available to tune - for vr auto that is every single item, flag and table the pcm has.
Xdf- https://pcmhacking.net/forums/viewtopic.php?f=7&t=5
Bin - https://pcmhacking.net/forums/viewtopic.php?f=27&t=613


The nvram board will work in both auto and manual vr. Manual vr will require a different bin loaded but can support up to 3bar of boost.

[EagleMark]

Any chance this could be made to work on 16197427 PCM from US?

[antus]

If they take this size memcal, then yes. You'll need to find the write line from the cpu, patch that through to the memcal header (if its not already present - the factory left it in for our later model pcms), and then need to patch in an aldl write function, and speak to me about adding detection and memory mapping to the plugin. None of it should be that difficult.

[brian89gp]

Is there documentation about what the jumpers do and where the jumper wire that came with is supposed to go?

[delcowizzid]

vl400 would of emailed a link with the instructions

[moose]

Are these suitable for VS 304 5L? (maybe a stupid question but I'm new here and not entirely mechanically minded lol )

[delcowizzid]

if it is a series 3 with maf sensor no but early vs 5.0 with map sensor yes

[vlad01]

Hi Guys,
just wondering a few things about these,
I am about to supercharge my Vr v6 auto, I will be running a toyota sc14 at 3psi boost , already have all the parts, the only thing stopping me is the tune,
mainly i am wondering if these would be capable of tuning for boost on an old Vr and if so what program would be best to do so, I have some very basic experience with Efilive but basically i want something with either a simple to use GUI or something with loads of research material on it, if i can get something like that or you guys could point me in the right direction I would love to buy one of these and tune the old beast myself,
The other thing i am wondering is if i get a Bin file for the Vr Auto, tune it up to spec and later get a Manual conversion, will i be able to swap this to a manual ecu without too much drama??
Thanks guys

I know a few people who fitted this type of SC, they all regretted it and claimed it was a backward step from stock. These SC are not even adequate for VW beetle engine with any sort of modification other than stock.

I personally know a mate who fitted one then latter tossed it and fitted small twin turbos for quick spooling, made over 250hp at the wheels with only low boost, 5psi ?. I recall he said he only got 20hp more over stock on the sc14 at 2-3psi and more than doubled the fuel consumption lol, It was all dyno tuned as well.

[Holden202T]

spend your money on a ebay turbo