pcmhacking.net

The upload failed at the bottom of the screen is my fail lol

maybe load an unstacked bin in tunerpro its only stacked to fill the nvram without people messing with stacking etc .

delcowizzid wrote:maybe load an unstacked bin in tunerpro its only stacked to fill the nvram without people messing with stacking etc .

Yeah I thought as much. Tried it anyways and still no luck with uploading hmmmmm

cant remember if vr auto ecu allready has the write line wire or not plus i presume you have the plugin for tunerpro installed

I updated everything just today to be sure. Pretty sure it's just a noob mistake in set up that's probably very simple for you guys and maybe over looking it? I'm not well versed in the op interface just yet

delcowizzid wrote:cant remember if vr auto ecu allready has the write line wire or not plus i presume you have the plugin for tunerpro installed

I'll check the ose$11 wiring in a min. Should show up if everything's good

Been a stock car with stock pcm and Nvram with aldl USB I never gave wiring a thought tbh

untick upload whole tables will make uploads faster will just upload the changed cells only i never have that ticked .
while logging goto items list veiw and choose message 0 status flags only and see what nvram status says

Ummmmmmm...nvram read only ffs

I'll now go n swap that on the board whilst self administering some slaps to the head

haha must need the write line wire added under the ecu main board or write protect jumper is on i presume you using your own gear LOL

W EN was already bridged on the NV RAM board?