VZ E55 ME9.6 Tunerpro XDF 92190064 OS

[shann1337]

Fresh Update, now have a 6L45e running and shifting gears in my 2005 VZ, with no external controllers. Thanks to Tre-Cool for the CAN info for the TCM. Few more days to tidy it up, and get tap shift working, then I'll be swapping the ECM OS over to 3811 to finalise the OS that can be used in any Holden E55.

this is very interesting, would be nice to get rid of the clunky 5l40e, ive already spent 4k on a reco unit

are there any plans to get other transmissions working within the xdf?

[Knackersjewels]

Not really, unless somebody was going to supply me a GM 8 or 10 speed, it's not on my priority list

[Knackersjewels]

Update: Successfully running a pre 2006 LY7 with the 3811 OS, with VCT working as factory. So 3811 OS is now my go to, and main focus of development.

IMRC control has been added, and can now be made functional in all engine variants.

I have made a functional patch that allows the ECM to signal an astra steering pump to spool up instantly after engine is running, using the above IMRC output, and repurposing the purge control output. Delay after start can be adjusted, but currently starts at 0.9seconds after the ecm sees 400rpm.


Working now on converting baro sensor to MAP, and adding IAT2, so a late model boost/temp sensor can be used. Currently for logging PIDs only.