PCM Hammer Release 021
Re: PCM Hammer Release 021
can anyone help me please?
-
antus
- Site Admin
- Posts: 8981
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCM Hammer Release 021
It looks like you have modified it correctly but you have based your changes on pcmhammer 2 preview which uses the assembly kernel which is known not working on p12. Try putting the same changes in to the older 021 version which is still using the C kernel.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: PCM Hammer Release 021
Thank you very much for your reply. I tried with version 021 as P12 1mb and I have the same problem, I don't know if trying as P12 2mb can change something or it is a useless attempt. From what I understand the problem is in the kernel upload.
In attachment the log
In attachment the log
- Attachments
-
- log 021 1mb.txt
- (68.35 KiB) Downloaded 41 times
-
antus
- Site Admin
- Posts: 8981
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCM Hammer Release 021
Hmm ok. It looks like there is no response to the first large kernel upload packet. What j2534 interface is it? It could be that it cannot handle large packets and it isnt sending it to the pcm. If thats the case, that interface isnt compatible with pcmhammer. You can hack the app to set smaller max packet sizes as a possible work around too.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: PCM Hammer Release 021
Interface is SM2... i have also AVDI, mongoose jlr, vas5054 and lauch j2534 but i can't find a way to make them work properly
-
antus
- Site Admin
- Posts: 8981
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCM Hammer Release 021
sm2 should work. i have the older mongoose pro gm II and that does work. hmmmmm.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
ironduke
- Posts: 694
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: PCM Hammer Release 021
Are you trying in vehicle? If so you might need to make up a bench harness. Also if aftermarket radio or remote start you could try pulling the fuses/removing the data line wire from either one of those temporarily to see if that helps.
Re: PCM Hammer Release 021
I also think sm2 is working fine. Unfortunately my mongosee is JLR, not GM.
I'm working on bench.
Re: PCM Hammer Release 021
About the app hack you trust in my abilities too much, i don't really know how to do that!antus wrote: ↑Fri May 23, 2025 7:53 am Hmm ok. It looks like there is no response to the first large kernel upload packet. What j2534 interface is it? It could be that it cannot handle large packets and it isnt sending it to the pcm. If thats the case, that interface isnt compatible with pcmhammer. You can hack the app to set smaller max packet sizes as a possible work around too.
