New to Tunerpro, assistance needed with a few things :-)

[Solid]

I ended up with 0.045 inj and it is idling well. With it at .040 it runs real lean. Yeah I will duck my head under the car soon then its first drive time with the cooler pipe connected

[Holden202T]

thats pretty good, i have seimens deka 80lbs and i had to change the injrate a bit from what the calc worked it out to be too ... but also i found varying info on the net about the specs, 80lb, 83lb, 850cc, 875cc etc so its likely you are never going to know for sure unless you get them flow tested.

[delcowizzid]

do you have a memcal plugged in for the knock filter and a knock sensor or it will show knock anything off idle.if you have them look for the dump or crossover hitting the body

[Solid]

Just gone for a few drives. I do have a memcal plugged in yes. This engine is pretty noisy and always was. I feel it has a valve train noise which is possibly what the knock is detecting. It would also explain why the car was always so slow. One thing I am having trouble with is when I am driving and back off the gas. The car goes completely lean and hunts. I have adjusted the ve table with fuel down low but it is going dead lean, off the scale of the wideband. For some reason it isnt getting fuel when I back off. The car idles and drives ok but as soon as you back off she leans out. Any ideas?

[Holden202T]

upload a log and your bin and i'll have a look if you like ?

if the knock sensor is not going to work you can always disable it!!

[Solid]

Thanks mate I will go for a drive soon and I will try to upload the log and file. I tried uploading a log before but because my TP5 wont save the log, it creates it as a temp log as a xdl file which i cant load as an attachment. Shoot me your email if you like and I will send it to you.

[delcowizzid]

it will hit a decel fuel cut at certian revs on decel will cut fuel right out .as for the hunting its the cutout coming in and out might have to mess with the settings for it mine does it as well i tuned most of it out i was jumping from DE to AE due to map variation just set the AE and DE map delta higher

[Holden202T]

Thanks mate I will go for a drive soon and I will try to upload the log and file. I tried uploading a log before but because my TP5 wont save the log, it creates it as a temp log as a xdl file which i cant load as an attachment. Shoot me your email if you like and I will send it to you.

zip the files up and then upload!

[Solid]

Here is a log and tune file. Not real pretty. Towards the very end of the file is a good place to look. I did notice in the adx file you sent that the boost gauge will only read to 99.7 on the dash screen. But if I look at it in the history table it does show boost to about 160kpa.

[delcowizzid]

add yourself some spark heres my safe spark table im running might have to copy it too notepad and select word wrap to veiw it all lined up watch out i run different rpm breakpoints

6400 33.05 55.90 37.97 36.21 36.21 34.10 30.94 30.23 28.13 24.61 21.45 20.39 18.63 17.93 17.23 17.23 15.82 14.06 14.06
6000 32.34 55.20 37.27 35.51 35.51 33.40 30.23 29.53 27.42 24.61 21.80 20.04 18.63 17.93 17.23 16.88 15.82 14.77 14.06
5600 31.64 54.49 36.56 34.80 34.80 32.70 29.53 28.83 26.72 24.61 21.80 19.69 17.93 17.58 16.88 16.17 15.47 15.12 14.41
5200 30.59 53.44 35.51 33.75 33.75 31.64 28.48 27.77 26.37 24.61 21.80 18.98 17.58 16.88 16.17 15.47 14.77 13.36 13.01
4800 29.88 52.73 34.80 33.05 33.05 30.94 27.77 27.07 26.02 24.61 21.45 18.98 17.23 16.17 15.47 15.12 14.41 13.01 12.30
4400 29.88 43.95 31.99 31.99 31.99 29.88 27.77 26.02 26.02 24.26 21.45 18.63 16.88 15.47 15.12 14.41 14.06 13.71 13.01
4000 29.88 45.00 34.80 31.99 31.99 30.94 28.83 27.07 26.02 24.26 21.45 18.28 16.52 14.41 13.71 13.36 12.66 11.95 11.60
3600 29.88 40.78 34.80 33.05 33.75 27.07 28.13 22.15 26.02 23.55 21.09 17.93 15.82 13.71 12.66 11.95 11.25 10.20 9.49
3200 29.88 40.78 34.80 33.75 31.99 26.02 27.07 22.15 24.96 22.50 20.04 16.88 14.41 12.30 11.25 10.20 9.49 8.79 8.44
2800 29.88 43.95 34.80 31.99 30.94 28.83 27.07 22.15 23.91 20.74 18.63 15.47 13.01 11.25 9.49 8.09 7.38 6.33 6.33
2400 29.88 45.70 33.75 31.99 29.88 28.83 26.02 21.09 22.15 19.34 17.23 15.12 12.66 10.90 8.09 6.68 5.27 5.98 5.63
2000 29.88 45.70 34.80 31.99 29.88 26.02 24.96 20.04 17.93 15.47 13.71 11.95 10.20 7.38 6.68 5.63 4.57 3.87 3.52
1600 20.04 46.76 35.86 30.94 27.07 24.96 22.15 15.12 13.36 11.25 10.55 9.49 8.44 8.09 7.73 7.03 5.98 5.98 5.27
1200 20.04 34.80 33.05 29.88 26.02 22.85 15.82 8.79 10.55 8.79 6.33 5.98 4.57 4.57 4.22 3.87 3.52 4.22 4.22
800 20.04 26.02 34.80 30.94 22.85 21.80 15.12 9.84 8.09 7.03 7.03 7.03 6.68 6.68 6.68 6.68 6.68 6.68 6.68
400 20.04 20.04 20.04 20.04 20.04 15.12 9.84 5.98 4.92 9.84 9.84 6.68 5.98 6.68 6.68 6.68 6.68 6.68 6.68