They go by many names, P01, P10, P12, P59, E38, VPW, '0411 etc.
Gampy
Posts: 2332Joined: Fri Dec 14, 2018 9:38 pm
Post by Gampy Tue Jul 27, 2021 11:04 am
Try this please ...
2004 Escalade 5.3AutoStock_824-1.bin
You only need to write the calibration segment.
I started with your
2004 Escalade 5.3AutoStock.bin
posted above, then swapped in the Fuel Segment from
HDW 12583660 - SERV 12586242 - OS 12587603 - 2004TahoeDBW5.3FlexFuel.bin
then copied the tables over from your
STOCK_2003 Tahoe 12579405.bin
posted in the
VATS delete thread.
Please let us know ...
-Enjoy
You do not have the required permissions to view the files attached to this post.
Intelligence is in the details!
yoheer
Posts: 81Joined: Sun Sep 06, 2020 12:04 pm
Post by yoheer Wed Jul 28, 2021 6:52 am
I will try and let you know.
Gampy
Posts: 2332Joined: Fri Dec 14, 2018 9:38 pm
Post by Gampy Wed Jul 28, 2021 1:56 pm
Thank you!
Intelligence is in the details!
yoheer
Posts: 81Joined: Sun Sep 06, 2020 12:04 pm
Post by yoheer Wed Jul 28, 2021 8:21 pm
Thank you
Gampy
Posts: 2332Joined: Fri Dec 14, 2018 9:38 pm
Post by Gampy Thu Jul 29, 2021 5:38 am
There is no tutorial for it's use ... Just open a bin (a copy of one) and explore it, figure it out and/or ask questions.
Intelligence is in the details!
joukoy
Posts: 405Joined: Mon Dec 16, 2019 5:27 pmcars: --
Post by joukoy Thu Jul 29, 2021 7:14 am
There is several methods for table copy, one is documented in:
https://universalpatcher.net/copy-table ... -bin-file/
Another method:
- Open tuner
- Open file with tables you want to copy (source)
- Switch to list mode
- Select all tables you want to copy
- Right click one table and select "Copy selected tables to..."
- Select destination file
- Apply
- Save As...
You do not have the required permissions to view the files attached to this post.
Gampy
Posts: 2332Joined: Fri Dec 14, 2018 9:38 pm
Post by Gampy Thu Jul 29, 2021 8:02 am
Awesome joukoy!
Intelligence is in the details!
antus
Site Admin
Posts: 10096Joined: Sat Feb 28, 2009 10:34 amcars: TX Gemini 2L Twincam 8psi
Post by antus Thu Jul 29, 2021 10:06 am
Thats very awesome!
Gampy
Posts: 2332Joined: Fri Dec 14, 2018 9:38 pm
Post by Gampy Thu Jul 29, 2021 10:29 am
I agree, the more I explore the more I find ...
Intelligence is in the details!
yoheer
Posts: 81Joined: Sun Sep 06, 2020 12:04 pm
Post by yoheer Sun Nov 07, 2021 7:06 am
So. the last bin made some corrections.
When there is about 3gal in the tank, the gage shows half
))))
Empty tank (engine stalled) shows 1/4.
I think I'm gonna get back to 9405 OS and try to make changes with Universal pather.
))))