Re: The1's Daily
Posted: Thu May 08, 2014 11:22 pm
Did you notice much change when you went to the bigger maf ? do you have any before and after test or dyno runs of it ?
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
The1's Daily
Page 46 of 69
Re: The1's Daily
Posted: Sat May 10, 2014 8:26 pm
yeh larger pipe, larger TB, bigger MAF all made a difference, especially to throttle response. Nothing big on a N/A though S/C or Turbo would make good gain. I have 200 cylair gain on some with MAF and larger pipe, this when hitting the limit of the stock MAF.
Re: The1's Daily
Posted: Tue May 13, 2014 2:02 pm
Camtec has a nice grind too. Just tuned it and came up with a massive torque spread on stock heads. Similar to XP but a bit more agressive
Re: The1's Daily
Posted: Tue May 13, 2014 6:43 pm
which camtec grind?
Re: The1's Daily
Posted: Tue May 13, 2014 11:09 pm
CT2853 49919ejukated wrote:which camtec grind?
Re: The1's Daily
Posted: Thu Oct 02, 2014 10:11 am
Well no progress as ive had no time, but well got lucky twice.
Picked up a good crank and set of L67 rods for $100
Then yesterday picked up all this for $700
RLM601 Double Row Chain kit
SPG604 Retainers
SPG605 Viton Stem Seals
623-12 Valve locks
CAM605 Comp Cams Stage 2 L67
JHO103A FMIC A2A
SPG606 Crow Lifters
SPG601 Crow 105lb Springs
ill be selling the springs, lifters, stem seals and a2a cooler, i already have lifters and stem seals
ill go with 130lb springs and order some pistons, rings and bearings in and chase up all the new gaskets i need.
Picked up a good crank and set of L67 rods for $100
Then yesterday picked up all this for $700
RLM601 Double Row Chain kit
SPG604 Retainers
SPG605 Viton Stem Seals
623-12 Valve locks
CAM605 Comp Cams Stage 2 L67
JHO103A FMIC A2A
SPG606 Crow Lifters
SPG601 Crow 105lb Springs
ill be selling the springs, lifters, stem seals and a2a cooler, i already have lifters and stem seals
ill go with 130lb springs and order some pistons, rings and bearings in and chase up all the new gaskets i need.
Re: The1's Daily
Posted: Thu Oct 02, 2014 1:07 pm
good scores there man 
Re: The1's Daily
Posted: Thu Oct 02, 2014 1:16 pm
what kinda pistons are you getting?
Re: The1's Daily
Posted: Thu Oct 02, 2014 1:40 pm
prob these ones, but zzp can't seem to get any stock,
http://shop.zzperformance.com/store/p/6 ... stons.aspx
There are these ones the same but but dont have a coating on them, ill keep looking through there catalogue and see i if i can find the ones with coating on them.
http://www.summitracing.com/int/parts/s ... make/buick
http://shop.zzperformance.com/store/p/6 ... stons.aspx
There are these ones the same but but dont have a coating on them, ill keep looking through there catalogue and see i if i can find the ones with coating on them.
http://www.summitracing.com/int/parts/s ... make/buick
Re: The1's Daily
Posted: Thu Oct 02, 2014 2:16 pm
Gee thats a good deal for the A2A and bits/pieces
The1 wrote:Well no progress as ive had no time, but well got lucky twice.
Picked up a good crank and set of L67 rods for $100
Then yesterday picked up all this for $700
RLM601 Double Row Chain kit
SPG604 Retainers
SPG605 Viton Stem Seals
623-12 Valve locks
CAM605 Comp Cams Stage 2 L67
JHO103A FMIC A2A
SPG606 Crow Lifters
SPG601 Crow 105lb Springs
ill be selling the springs, lifters, stem seals and a2a cooler, i already have lifters and stem seals
ill go with 130lb springs and order some pistons, rings and bearings in and chase up all the new gaskets i need.