Page 58 of 68
Re: Segment Swap utility
Posted: Mon Jan 25, 2021 3:23 pm
by joukoy
kostia111 wrote:something broke
Look here please
Can you explain, step by step, what you did to get this?
When you uncheck "autodetect config", you should manually select config file for your bin -file. Or cancel, if you handle file without config...
Re: Segment Swap utility
Posted: Mon Jan 25, 2021 6:06 pm
by kur4o
It looks like the program is searching for xml named .xml.xml for some reason
Can you check debug and see what you get there. Might be autoconfig with some bad data. Or corrupted autoconfig.
Edit:
I managed to duplicate the issue. When you click on autodetect[and cancel the dialog] and don`t select a valid xml it will act like that.
Re: Segment Swap utility
Posted: Mon Jan 25, 2021 9:02 pm
by malets84
Hello! I have the same problem.I need to create my own XML files for my work.
I open the program,remove the autodetect flag.I create my own XML file, save it.I specify my XML file,the program writes "successfully loaded".I select the file I need, upload it,and only the file name is displayed on the screen.I load the file a second time-writes that the file xml.xml not found.The third time xml.xml.xml.-not found and so on.
Re: Segment Swap utility
Posted: Mon Jan 25, 2021 11:13 pm
by kur4o
malets84 wrote:Hello! I have the same problem.I need to create my own XML files for my work.
I open the program,remove the autodetect flag.I create my own XML file, save it.I specify my XML file,the program writes "successfully loaded".I select the file I need, upload it,and only the file name is displayed on the screen.I load the file a second time-writes that the file xml.xml not found.The third time xml.xml.xml.-not found and so on.
Thanks for the feedback. Definitely some bug was introduced at some point.
Re: Segment Swap utility
Posted: Tue Jan 26, 2021 12:50 am
by joukoy
0.16.25
Fixed bug which allows saving empty filename, resulting filename ".xml"
malets84 wrote:Hello! I have the same problem.I need to create my own XML files for my work.
I open the program,remove the autodetect flag.I create my own XML file, save it.I specify my XML file,the program writes "successfully loaded".I select the file I need, upload it,and only the file name is displayed on the screen.I load the file a second time-writes that the file xml.xml not found.The third time xml.xml.xml.-not found and so on.
If you get this problem again, can you send your XML file by PM or email.
If possible, bin-file too, it helps debugging.
Re: Segment Swap utility
Posted: Tue Jan 26, 2021 3:19 am
by malets84
Thanks for the quick fix, but it doesn't work.Problem with "xml.xml.xml" missing, but the screen does not display any information about the file(segment size,checksums, and so on).Only the name of my file that I uploaded is displayed.You can take any bin file, create xml for it, and most likely see it on the screen, the same as I did.On earlier versions(0.12.37.0 for example), I can do this.
Re: Segment Swap utility
Posted: Tue Jan 26, 2021 3:50 am
by ironduke
15.94 version lets you choose an xml manually then load a bin for that xml and it works.. 16.16 and up are failing.. It's like it's not actually loading the xml?
Start the program, uncheck Autodetect config and it opens up a popup to choose your xml, select any xml and the older version then shows that xml at the top of the screen and works normally, 16.16 and up if you do the same thing after selecting the xml file it just shows (v 1) or (v3) at the top of the screen.
Re: Segment Swap utility
Posted: Tue Jan 26, 2021 4:22 am
by joukoy
ironduke wrote:15.94 version lets you choose an xml manually then load a bin for that xml and it works.. 16.16 and up are failing.. It's like it's not actually loading the xml?
Start the program, uncheck Autodetect config and it opens up a popup to choose your xml, select any xml and the older version then shows that xml at the top of the screen and works normally, 16.16 and up if you do the same thing after selecting the xml file it just shows (v 1) or (v3) at the top of the screen.
0.16.26 fixes this.
There was quite massive modifications when I made possible to load multiple different files to tuner at same time, this is complications.
Re: Segment Swap utility
Posted: Tue Jan 26, 2021 5:03 am
by malets84
Thank you very much!Everything worked.There is still a wish.When working, I need to display some data in HEX.When creating XML in the "Extra info" item, if you select HEX values longer than 4 bytes, only 4 bytes will be displayed,and I need more.If you select text, any number of characters is displayed.If you fix it, I will be grateful.
Re: Segment Swap utility
Posted: Tue Jan 26, 2021 5:45 am
by joukoy
malets84 wrote:Thank you very much!Everything worked.There is still a wish.When working, I need to display some data in HEX.When creating XML in the "Extra info" item, if you select HEX values longer than 4 bytes, only 4 bytes will be displayed,and I need more.If you select text, any number of characters is displayed.If you fix it, I will be grateful.
Fixed in 0.16.27
Edit:
Why not use tuner?