Re: vs manual ecu
Posted: Wed Nov 11, 2015 12:20 pm
Have a look at the custom tunes threads could be a good spot there.
Cool thanks mate. maybe throw it up in http://pcmhacking.net/forums/viewtopic.php?f=7&t=140.ralcool wrote:I'd use the vs loom. Can't confirm if a vt ecu will run vs code.. they look identical to me tho
In the end you just want an engine that works. It a shame its a lottery if the ecu has all the missing parts for the T5.
But you will need to change the timing map in the tune man, ticking the flags isn't enough.
Luckily the vs_v6_sc_ehanced tune is by far the most detailed xdf I've seen. My tweaked tune work probably be perfect for him.
I've tried running without the vss and all the difference seemed to be the stalling after deceleration as has been reported elsewhere.
The car otherwise ran the l67 tune find in the spare '728.
Just not sure if to post the modified 'the1's enhanced vs code here or someplace sanctioned in the forum.
cheers
I gather with the timing youve basically just added a fair bit in the low 600-400 colomn to create a somewhat idle loop?