Page 7 of 8
Re: VE Instrument Cluster EEPROM Programming
Posted: Mon Nov 01, 2021 2:54 pm
by jca
Are that makes sense , yep I reckon the statesman file I up loaded early might of had a bad connection so now I basically don't have a file to put back on it so I've been trying to use a Calais bin but has no vin so I need to add that , so will need to add my statesman vin to it and flash
Re: VE Instrument Cluster EEPROM Programming
Posted: Wed Nov 03, 2021 8:44 am
by VX L67 Getrag
Just for anyone else that may need it I found a eeprom with what looks to be that calibration TIS said was needed....
Re: VE Instrument Cluster EEPROM Programming
Posted: Wed Nov 03, 2021 9:26 am
by mattyjf01
VX L67 Getrag wrote:Just for anyone else that may need it I found a eeprom with what looks to be that calibration TIS said was needed....
Nice
53728 kms?
Re: VE Instrument Cluster EEPROM Programming
Posted: Wed Nov 03, 2021 9:48 am
by VX L67 Getrag
from my note's 53,718 but you could be correct
Re: VE Instrument Cluster EEPROM Programming
Posted: Mon Nov 08, 2021 8:32 pm
by mattyjf01
VX L67 Getrag wrote:from my note's 53,718 but you could be correct
My calculation can be out by upto 16kms
Re: VE Instrument Cluster EEPROM Programming
Posted: Thu Aug 01, 2024 12:32 am
by radrace19
mattyjf01 wrote: ↑Sun Aug 09, 2020 5:36 pm
Ve Series 2 odometer
KMs
Start__End__Range__Checksum & ^FF
65536 81919 16383 DB24
10000 13FFF 3FFF
81920 106495 24575 A758
14000 19FFF 5FFF
106496 131071 24575 8F70
1A000 1FFFF 5FFF
131072 139263 8191 DF20
20000 21FFF 1FFF
139264 163839 24575 B748
22000 27FFF 5FFF
163840 180223 16383 AF50
28000 2BFFF 3FFF
180224 221183 40959 ?
2C000 35FFF 9FFF
221184 245759 24575 1FE0
36000 3BFFF 5FFF
245760 294911 49151 ?
3C000 47FFF BFFF
294912 319487 24575 D629
48000 4DFFF 5FFF
0 kms
F50A EA15 D42B A857
50AF A15E 42BD 857A
0AF5 15EA 2BD4 57A8
AF50 5EA1 BD42 7A85
Ive worked out how it Calculates the km
But cant see the pattern for the checksum except the High byte low byte xor FF
I know this is a little old, but I'm having trouble understanding the odometer on the VE Series 2 eeprom. If someone could explain a little more on how it is calculated.
I was able to use a zero kms file then use SPS to put the corrected mileage. In the eeprom the odometer is 0x8 to 0x27
From what I can tell 0x8 to 0x17 are the main bytes. 0x18 to 0x27 are swapped bytes of the first set at least in the few bins I've looked at.
Re: VE Instrument Cluster EEPROM Programming
Posted: Thu Aug 01, 2024 7:42 am
by mattyjf01
VDO rolling algorithm
Re: VE Instrument Cluster EEPROM Programming
Posted: Fri Aug 02, 2024 5:12 am
by radrace19
mattyjf01 wrote: ↑Thu Aug 01, 2024 7:42 am
VDO rolling algorithm
Yes, I've read that on a few sites, but for the life of me I can't find it.
Re: VE Instrument Cluster EEPROM Programming
Posted: Sat Aug 03, 2024 3:05 am
by radrace19
I dug deeper into the interwebs and found it in the wayback machine.
Finding a base 16 mileage is easy. Then getting the variant involves the rest of the byte pairs it looks like, and why some of the inverted pairs don't match.
Re: VE Instrument Cluster EEPROM Programming
Posted: Tue Sep 24, 2024 10:38 pm
by HOLDE_N
Holle everyone
I have holden ve 2007 v6 LEO series 1, I bought Series 1 Black back plastic cluster when I start engine, the ABS is Lighting, my original cluster is Series 1 White back plastic.
So I need a file (bin) to reprogramming the eeprom