marinized v12 running 2 x 808's

[Dylan]

Send me your latest bin and log I'll look at the codes and quick look at the VE.

[jenko]

I was going to take 3% off the 90 and 100 kpa ve columns and see what happens next run .I am aiming for 13.2 :1 @ 100kpa which should be around 850 mv on narrow band

[antus]

in general let it process the code (its allowed to know that something is missing and treat it as such) but clear the matching cel enable, as you dont want it triggering the CEL light. Then set up the CEL light somewhere you can see it, and if it comes on you know you've developed an unexpected problem. Same for knock, it will log that its present, and you should, as you have, set the knock enable temp to the max so that it never gets there, and verify that knock retard degrees stays at zero (it does in your log) then you can ignore that flag too.

Ive been working on oseplugin today and I think ive found and fixed the instability. Ive sent you a PM and if you give it the thumbs up i'll release it for all.

[jenko]

took the boat out for another run and logged using new ose plugin worked a treat made a few changes took 5% off ve tables above 2000rpm and 60kpa have uploaded log

[antus]

That looks much better, but now idle is too lean. Do you have a wideband coming and plans to connect to the first computer to get it in the logs too? Theres a couple of gaps eg 1:17 to 1:51, 3:28 to 3:35. Did you turn the engine off or loose power but leave the laptop logging a couple of times? How does it feel?

[jenko]

had a couple of stalls as the idle is lean , engine feels good didn't notice that much difference in power but gained rpm at top end .has plenty of punch at all revs.
doing 100 kph at the 5400 rpm and it doesn't take long to get up to that speed .
the exhaust certainly is not as fumy .
Might go with a 14point7 wide band and controller,thinking I might put in 2 and leave them in.
I did knock the usb cable out a couple of times it was getting a bit choppy

[jenko]

took boat out for a run going better have been fiddling with idle and timing
short vid https://youtu.be/QOWdGWSBBps

[vlad01]

going awesome! v12 sounds remarkably same as most 6 cylinders.

[antus]

sounding and looking good!

[HQ355]

Looks great, are you in the "woody club" a mate of mine is with his boat, there's some really quick ones as well