pcmhacking.net

my reg key as above, points to C:\WINDOWS\Microsoft.NET\Framework\ ... maybe have a look at the folder and see whats there .... might give some clues ....

Can the flash tool be used to reset air bag warnings program keyheads like a tech1 or tech 2 with the right commands.

Yep, if you know the command there is a function to send ALDL frames so can reset airbag lights .. https://pcmhacking.net/forums/viewtopi ... 6&start=60 .

Programming key heads would be hard with single ALDL frames, and I wont be adding the function to the flashtool as I dont feel its a feature thats really suitable for public use.

FINALLY back online and ready to punch the next Telstra tech that swears i have a problem with my landline.....wrooong,they f@#ked up at the exchange.
Anyways....d/l the latest V1.27.exe and netcfv35
When i try to run the program i get....OSE Enhanced Flash Tool v127.exe - application error
failed to initialize properly (0xc0000135) click ok to terminate the application.
Is this my computer or a problem with the exe file??
Just having a play around in this great melbourne weather before i'm off to work.
cheers...Mario

well... netcfv35 is the compact .net framework for windows mobiles

try this one: http://www.microsoft.com/downloads/deta ... laylang=en

youll probably need to scroll down the page and download the full package

Thanks Jayme...d/loaded and all working now.
Thanks again

PS....still amazed at the work you guys are doing on here!

is it normal to get bins with different contents everytime you use 'get bin' on a VX/VY flash pcm? Every time i use 'get bin' to read out the pcm and compare the files there are differences mostly in the same places through the bin. The differences seem to be in the eeprom area up to 0x2000?

yes that should be fine, as those addresses access RAM (amongst other things) which the processor uses to store temporary data.

In the next realease there is an option to fill the RAM, EEPROM and CPU registers with FF after doing a 'Get Bin'.

Have updated the first post with the link to v1.28.The main change is the comms to try and make it more reliable and detect silence better.

- Listen to chatter now gets most data frames, it still misses some smaller frames. Set comm timeout to 100mS to show the bus data scheduling on vehicles with a few devices, dont forget to change it back to 300mS afterwards!
- Added TP5 flex table editing support
- Experimental auto echo detection (does not work well on vehicles with lots of bus chatter)
- Added option to clear the internal CPU registers when doing a get bin on flash based PCMs