pcmhacking.net

How did you rig up the injector test sprayer delco?

its setup on the vr turbo in the shed LOL spare vn rail and reg plumbed in instead of the car ones and i just bridge the fuel pump relay plug to power the pump and use the power out of there to trigger a spare set of injector plugs its a simple setup and its done a good enough job to see if any injectors are junk.stage 2 of the build is under way to have graduated cylinders and a circuit or delco ecu to pulse injectors for cleaning and a nice policarb box.i allready have a stainless fuel tank to hold cleaning fluid with pump and return fittings and breather

Nice simple set up. The final product should be good.

trying to compare flow with coffee jars was far from optimal LOL

just for sam seimens deka 60lber at 42psi man its a wide and very atomised spray allmost too wide
[youtube]http://www.youtube.com/watch?v=hFR9je4G ... e=youtu.be[/youtube]

and the colour of some carb cleaner after cleaning the insides of my 39lbers overnight yuck
[youtube]http://www.youtube.com/watch?v=lreFgVSy ... e=youtu.be[/youtube]

I would love to see them squirt just like in a running car but outside.

im working on that

Thats a serious amount of fuel there!


A quick youtube clip of a running F1 engine with expsoed injectors high up in the intake ..
[youtube]http://www.youtube.com/watch?v=y2iBbwocYZw[/youtube]