Page 67 of 69
Re: The1's Daily
Posted: Tue Oct 27, 2020 11:53 am
by The1
They wanted me to post it back which i have and they are going to get the set replaced with what it should be, the seller agreed, so im waiting to hear back.
Re: The1's Daily
Posted: Tue Oct 27, 2020 6:20 pm
by vlad01
Good to hear.
Re: The1's Daily
Posted: Wed Oct 28, 2020 6:36 pm
by The1
Got replacement back today.. Back to 2 piece sprocket
Re: The1's Daily
Posted: Wed Oct 28, 2020 6:43 pm
by vlad01
Some of the stock pics on ebay for these show 2 piece as well, none of them showed 1 piece like the first one you got.
Let us know how it fits the oil pump.
Re: The1's Daily
Posted: Wed Oct 28, 2020 6:52 pm
by The1
First kit I had was 2 piece and was fine, I have the mace thinner pump gear cover
Re: The1's Daily
Posted: Wed Oct 28, 2020 7:06 pm
by vlad01
yeah a lot of people overlook the oil pump cover and grind the chain on the cover. I used the mace machined cover on mine and there was ample clearance after that.
Re: The1's Daily
Posted: Wed Oct 28, 2020 10:50 pm
by The1
You can use different gaskets to, I think zzp at one point had a few different thickness's
Re: The1's Daily
Posted: Thu Oct 29, 2020 12:22 pm
by vlad01
I don't have that choice. Having only pre-eco engines I only have access to either NOS or standard paper gaskets which are all standard thickness. They are different to ecotec.
Re: The1's Daily
Posted: Thu Oct 29, 2020 2:51 pm
by immortality
Double up the gasket?
Re: The1's Daily
Posted: Thu Oct 29, 2020 4:40 pm
by vlad01
Just use the machined oil pump cover and call it done than doing a dodgy of double gaskets.