Page 8 of 13

Re: Converting 202 to ABS Crank Trigger

Posted: Sat Mar 02, 2013 9:06 pm
by Holden202T
why not :)

Re: Converting 202 to ABS Crank Trigger

Posted: Sun Mar 03, 2013 4:57 pm
by Holden202T
well today i got extremely keen and put a spare stock 202 into the gemini so i could use it to test the 36 - 1 trigger with the VL400 ignition module!
temp motor.jpg
temp motor.jpg (417.43 KiB) Viewed 7466 times
as you can see, just like factory :)

so got it all working on the dizzy setup to make sure i had a working setup before i started throwing unknowns into the mix, also had to make a suitable methanol tune for a stock 202 so did all that and when i was happy i connected this up.
36-1 mounted.jpg
36-1 mounted.jpg (229.78 KiB) Viewed 7466 times
so then changed the reference angle in the tune to 60 degrees and BANG! fired up straight away and purred like a cranky lion without an exhaust hahaha :punk:

so very happy with that.

need to do some things like put a muffler on it then i'll work on making sure the reference angle is actually what i'm commanding and any other stuff VL400 wants me to test for his ignition module.

this firmware apparently has been tested on the bench and thats it, so its looking good so far!!

thanks again to VL400 for all his work and his great products! all thats left to do now is get another 5 coils connected and then i can remove the dizzy all together!!

Re: Converting 202 to ABS Crank Trigger

Posted: Sun Mar 03, 2013 5:13 pm
by VX L67 Getrag
Sounds like it's coming along nicely!

So many things going on here & it's all good as always!

Re: Converting 202 to ABS Crank Trigger

Posted: Sun Mar 03, 2013 5:45 pm
by Holden202T
yeah i get bored easy, need to keep the projects happening :)

Re: Converting 202 to ABS Crank Trigger

Posted: Sun Mar 03, 2013 6:35 pm
by Holden202T
and heres a video for ye all...

note tune is shit :)

[youtube]http://www.youtube.com/watch?v=j50avXXgTrs[/youtube]

Re: Converting 202 to ABS Crank Trigger

Posted: Sun Mar 03, 2013 7:09 pm
by VX L67 Getrag
Looks the goods, nice water cooling!

Yeah have to keep things ticking over or life gets boring!

Re: Converting 202 to ABS Crank Trigger

Posted: Sun Mar 03, 2013 7:24 pm
by VL400
:punk: Its alive! You sure do work fast.

Re: Converting 202 to ABS Crank Trigger

Posted: Sun Mar 03, 2013 7:39 pm
by Holden202T
well yeah you know, missus goes out for the day, what is a man to do .... :)

Re: Converting 202 to ABS Crank Trigger

Posted: Sun Mar 03, 2013 7:46 pm
by VX L67 Getrag
LOL yeah I had the same scenario today, but I was too lazy & just watched the car racing ALL DAY!

Re: Converting 202 to ABS Crank Trigger

Posted: Sun Mar 03, 2013 7:55 pm
by yoda69
Easy to spot those without kids :D
Make the most of it while you can, as they're definitely a life changing addition. Not that I'd change it.