0081(2) wrote:I have a VY V6 with a l67 conversion running the flash PCM and happy to help with testing if needed
Right.. soooo, that is still usin the original VY V6 flash ecu? Or the L67 ecu?
Since thatll make a big difference in the choice you need to select as he vehicle!
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
VL400 wrote:Can test on 12P and 11P if you need that.
I will 100% need that.
I realized the "colour" of the gauges hasnt been completed. Just doing that now, then itll be all ready!
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Good timing too, made a freeze frame ADX today for 11P. But it does not have the smarts of your program to set the calcs and names of logged params, so mines fairly useless
VL400 wrote:Flip me a PM when you need something tested.
Good timing too, made a freeze frame ADX today for 11P. But it does not have the smarts of your program to set the calcs and names of logged params, so mines fairly useless
I really got to learn how to make an ADX. I'm not sure on TunerPro's limitations at all!
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
TP does way more than we use it for, its a very powerful tool and can do some neat stuff. Id recommend having a play, might be a few ideas you can build on for your tool.
The only thing I miss from other tuning packages is the ability to overlay logs, its handy to compare changes
VL400 wrote:TP does way more than we use it for, its a very powerful tool and can do some neat stuff. Id recommend having a play, might be a few ideas you can build on for your tool.
The only thing I miss from other tuning packages is the ability to overlay logs, its handy to compare changes
Overlay logs?
Not sure Im following.. do you mean to replay two logs at the same time? Or to have an open graph view of all the data from two logs displayed at the same time?
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Well, no changing colour progressbars. Would need custom GDI to recreate the bars and animation and everything just for the colour.
I attempted my own but it "flickers" which really does my head in.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Yeah open two (or more) logs at once to overlay them. In Innovate Logworks you can select a section of a log and add that as an overlay to another log. Can then compare for instance a WOT pull and the rate of acceleration by sliding the overlay section along until it lines up.
It also lets you selectively choose where histogram datat comes from, so you can ignore the AE/DE sections and only include steady state areas.
