Page 8 of 16
Re: ALDL ECU's
Posted: Wed May 06, 2015 4:17 pm
by Tazzi
0081(2) wrote:I have a VY V6 with a l67 conversion running the flash PCM and happy to help with testing if needed
Right.. soooo, that is still usin the original VY V6 flash ecu? Or the L67 ecu?
Since thatll make a big difference in the choice you need to select as he vehicle!
Re: ALDL ECU's
Posted: Wed May 06, 2015 6:30 pm
by VL400
Can test on 12P and 11P if you need that.
Re: ALDL ECU's
Posted: Wed May 06, 2015 6:38 pm
by Tazzi
VL400 wrote:Can test on 12P and 11P if you need that.
I will 100% need that.
I realized the "colour" of the gauges hasnt been completed. Just doing that now, then itll be all ready!
Re: ALDL ECU's
Posted: Wed May 06, 2015 11:07 pm
by 0081(2)
Tazzi wrote:0081(2) wrote:I have a VY V6 with a l67 conversion running the flash PCM and happy to help with testing if needed
Right.. soooo, that is still usin the original VY V6 flash ecu? Or the L67 ecu?
Since thatll make a big difference in the choice you need to select as he vehicle!
Orginal flash PCM
Re: ALDL ECU's
Posted: Wed May 06, 2015 11:13 pm
by VL400
Flip me a PM when you need something tested.
Good timing too, made a freeze frame ADX today for 11P. But it does not have the smarts of your program to set the calcs and names of logged params, so mines fairly useless
Re: ALDL ECU's
Posted: Thu May 07, 2015 10:14 am
by Tazzi
VL400 wrote:Flip me a PM when you need something tested.
Good timing too, made a freeze frame ADX today for 11P. But it does not have the smarts of your program to set the calcs and names of logged params, so mines fairly useless
I really got to learn how to make an ADX. I'm not sure on TunerPro's limitations at all!
Re: ALDL ECU's
Posted: Thu May 07, 2015 8:00 pm
by VL400
TP does way more than we use it for, its a very powerful tool and can do some neat stuff. Id recommend having a play, might be a few ideas you can build on for your tool.
The only thing I miss from other tuning packages is the ability to overlay logs, its handy to compare changes
Re: ALDL ECU's
Posted: Thu May 07, 2015 10:45 pm
by Tazzi
VL400 wrote:TP does way more than we use it for, its a very powerful tool and can do some neat stuff. Id recommend having a play, might be a few ideas you can build on for your tool.
The only thing I miss from other tuning packages is the ability to overlay logs, its handy to compare changes
Overlay logs?
Not sure Im following.. do you mean to replay two logs at the same time? Or to have an open graph view of all the data from two logs displayed at the same time?
Re: ALDL ECU's
Posted: Fri May 08, 2015 10:25 am
by Tazzi
Well, no changing colour progressbars. Would need custom GDI to recreate the bars and animation and everything just for the colour.
I attempted my own but it "flickers" which really does my head in.
Re: ALDL ECU's
Posted: Fri May 08, 2015 3:39 pm
by VL400
Yeah open two (or more) logs at once to overlay them. In Innovate Logworks you can select a section of a log and add that as an overlay to another log. Can then compare for instance a WOT pull and the rate of acceleration by sliding the overlay section along until it lines up.
It also lets you selectively choose where histogram datat comes from, so you can ignore the AE/DE sections and only include steady state areas.