pcmhacking.net

Posted: **Wed Aug 02, 2023 1:43 pm**

Did you try the new drivers or firmware?

Posted: **Fri Aug 04, 2023 4:07 pm**

tried downloading new j1979 software and updating firmware to version 1.8 and then tried hammer on p01. tried 4x and 1x without success. here's the log

PcmHammer_debugLog_godiagfirmware1.8.txt: (4.15 KiB) Downloaded 55 times

Posted: **Fri Aug 04, 2023 4:38 pm**

It looks like its breaking as soon as it tries to send the first 10 byte packet.

Code: Select all

[02:03:09:634]  J2534 setting VPW 4X
[02:03:09:634]  Sending 'test device present' notification.
[02:03:09:634]  TX: 8C FE F0 3F
[02:03:09:634]  Sending 'test device present' notification.
[02:03:09:634]  TX: 8C FE F0 3F
[02:03:09:634]  Loaded C:\Users\Cincinnatus\Desktop\PcmHammer021.2\Kernel-P01.bin
[02:03:09:634]  Sending upload request for kernel size 7890, loadaddress FF8000
[02:03:09:634]  TX: 6C 10 F0 34 00 10 00 FF 80 00
[02:03:12:635]  Send failed. Attempt #1
[02:03:12:635]  TX: 6C 10 F0 34 00 10 00 FF 80 00
[02:03:15:635]  Send failed. Attempt #2

pcmhacking.net

godiag nano with pcmhammer

Re: godiag nano with pcmhammer

Re: godiag nano with pcmhammer

Re: godiag nano with pcmhammer