Re: First fire up using Rt
Posted: Wed Jan 09, 2013 11:48 am
with this blokes machining skills im sure he can turn up a block to make the IAC work 
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
First fire up using Rt
Page 9 of 9
Re: First fire up using Rt
Posted: Wed Jan 09, 2013 4:38 pm
last manifold i built i cut the iac part off a vn throttlebody and welded it on the plenum LOL
Re: First fire up using Rt
Posted: Thu Jan 10, 2013 12:30 pm
haha, nice onedelcowizzid wrote:last manifold i built i cut the iac part off a vn throttlebody and welded it on the plenum LOL
Turns out due to my not so perfect throttle blade that even when the throttle is fully shut there is enough air to idle. So once warm the idle is still around the 1,400RPM mark. Ideal would be about 1,200 but I have way too many other things on my plate at the moment to spend too much time getting it any better.
cheers