pcmhacking.net

Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/

PCM Hammer Release 012

https://pcmhacking.net/forums/viewtopic.php?t=6681

Page 9 of 10

Re: PCM Hammer Release 012

Posted: Sat Apr 11, 2020 5:01 am
by Windsma
debug log for P01 os8322
read the bin file fine.
modified with tunerpro and tried to write.
I get this error every time.

.txt attached.

Re: PCM Hammer Release 012

Posted: Sat Apr 11, 2020 6:36 am
by Gampy
Windsma wrote:debug log for P01 os8322
read the bin file fine.
modified with tunerpro and tried to write.
I get this error every time.

.txt attached.
Top of the log is cut off...
What Tool ??
[edit] I now see AllPro deeper in the log ... Turn off 4x Communication, are you bench flashing or in vehicle flashing ??

Please try a 'Test Write' after disabling 4x communication on the Options menu.

[edit]
Tip: One should always try a 'Test Write' first ...

Re: PCM Hammer Release 012

Posted: Sun Apr 12, 2020 4:02 am
by Windsma
That worked thank you. Bench flash
Read and write times doubled.

Re: PCM Hammer Release 012

Posted: Sun Apr 12, 2020 4:39 am
by NSFW
I have some work in progress that will speed up reads and writes with the AllPro and ObdLink devices.

Good news: AllPro is way faster now - calibration writes went from 4:08 to 1:33, and 512 read went from 15 minutes to under 5.

Bad news: Reads and writes with an ObdLink LX are just broken. But I'm working on it...

Re: PCM Hammer Release 012

Posted: Sun Apr 12, 2020 5:52 am
by Gampy
My curiosity is, have you got the AllPro working 4x on the bench ??

Re: PCM Hammer Release 012

Posted: Sun Apr 12, 2020 7:31 am
by Windsma
my allpro did work several times on 4x. Occasionally, I would need power cycle the pcm for it to connect.

I just had time to read the entire thread... where my question was answered... several times. sorry about that.

Request: I do miss the reassurance of the "Flash Successful!" message at the end.

Re: PCM Hammer Release 012

Posted: Tue Apr 14, 2020 3:37 am
by In-Tech
Hiya, good feedback is in order. I posted when I got PCM Hammer 12 working on my Win7 machine and used my ObdLink SX and my AVT852 successfully. Sooooo I finally tried out my OBDX Pro VT since my VXDIAG j2534 interface showed up and I had some new toys to play with and get working. Great job ALL you guys for making the Hammer work on all these devices :thumbup: The OBDX Pro VT was actually the fastest. I actually ran the AVT852 twice just to verify. Now I'm off to the Bosch E38 section to report in :mrgreen:

Code: Select all

[01:39:26:902]  PCM Hammer 012
[01:39:27:198]  AVT 852 Reset OK
[01:39:27:198]  AVT Firmware 1.1
[01:39:27:588]  Thanks for using PCM Hammer.
[01:39:34:592]  VIN: 1GNEK13Z34J235452
[01:39:34:686]  OS ID: 12587603
[01:39:34:764]  Calibration ID: 12587672
[01:39:34:842]  Hardware ID: 12583660
[01:39:34:998]  Serial Number: 1LA0PQL34037
[01:39:35:092]  Broad Cast Code: YFXL
[01:39:35:185]  MEC: 0

[01:52:47:760]  Read complete.
[01:52:47:791]  All write-request messages succeeded on the first try. You have an excellent connection to the PCM.
[01:52:47:823]  We're not sure how much retrying is normal for a read operation on a 1024kb PCM.
[01:52:47:854]  Please help by sharing your results in the PCM Hammer thread at pcmhacking.net.
[01:52:47:885]  Starting verification...
[01:52:47:932]  Calculating CRCs from file...
[01:52:48:025]  Requesting CRCs from PCM...
[01:52:48:166]  	Range		File CRC		PCM CRC	Verdict	Purpose
[01:52:49:929]  0F0000-0FFFFF	8D0F8F91	8D0F8F91	Same	OperatingSystem
[01:52:51:645]  0E0000-0EFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[01:52:53:361]  0D0000-0DFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[01:52:55:077]  0C0000-0CFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[01:52:56:793]  0B0000-0BFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[01:52:58:509]  0A0000-0AFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[01:53:00:225]  090000-09FFFF	7DA5C19F	7DA5C19F	Same	OperatingSystem
[01:53:01:956]  080000-08FFFF	CDDEAE4C	CDDEAE4C	Same	OperatingSystem
[01:53:03:672]  070000-07FFFF	D006BDC7	D006BDC7	Same	OperatingSystem
[01:53:05:388]  060000-06FFFF	D2B04EC0	D2B04EC0	Same	OperatingSystem
[01:53:07:104]  050000-05FFFF	36511E94	36511E94	Same	OperatingSystem
[01:53:08:820]  040000-04FFFF	F6B0E81A	F6B0E81A	Same	OperatingSystem
[01:53:10:536]  030000-03FFFF	A97E3395	A97E3395	Same	OperatingSystem
[01:53:12:252]  020000-02FFFF	EE1B7BAD	EE1B7BAD	Same	OperatingSystem
[01:53:13:968]  010000-01FFFF	4783A472	4783A472	Same	Calibration
[01:53:15:684]  008000-00FFFF	B25006D0	B25006D0	Same	Calibration
[01:53:17:400]  006000-007FFF	76A11E86	76A11E86	Same	Parameter
[01:53:19:116]  004000-005FFF	85B5BB36	85B5BB36	Same	Parameter
[01:53:20:832]  000000-003FFF	AE42598F	AE42598F	Same	Boot
[01:53:20:926]  The contents of the file match the contents of the PCM.
[01:53:21:019]  Clearing trouble codes.
[01:53:22:704]  Clearing trouble codes.
[01:53:23:375]  Elapsed time 00:04:58.1945237

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Now with OBDX Pro VT

[02:20:01:779]  PCM Hammer 012
[02:20:02:184]  Device Found: OBDX Pro VT
[02:20:02:216]  Device Successfully Initialized and Ready
[02:20:06:771]  VIN: 1GNEK13Z34J235452
[02:20:06:786]  OS ID: 12587603
[02:20:06:818]  Calibration ID: 12587672
[02:20:06:833]  Hardware ID: 12583660
[02:20:06:911]  Serial Number: 1LA0PQL34037
[02:20:06:942]  Broad Cast Code: YFXL
[02:20:06:958]  MEC: 0

[02:20:28:314]  Querying operating system of current PCM.
[02:20:28:346]  OSID: 12587603
[02:20:28:439]  Unlock succeeded.
[02:20:28:470]  Attempting switch to VPW 4x
[02:20:28:502]  Module 0x10 (engine controller) has agreed to enter high-speed mode.
[02:20:29:562]  Uploading kernel to PCM.
[02:20:30:327]  Kernel upload 49% complete.
[02:20:31:091]  Kernel upload 100% complete.
[02:20:31:419]  Kernel Version: 010301BB
[02:20:31:434]  kernel uploaded to PCM succesfully. Requesting data...
[02:20:33:977]  Flash chip: AMD AM29F800BB, 1mb

[02:24:32:548]  Read complete.
[02:24:32:580]  All write-request messages succeeded on the first try. You have an excellent connection to the PCM.
[02:24:32:611]  We're not sure how much retrying is normal for a read operation on a 1024kb PCM.
[02:24:32:642]  Please help by sharing your results in the PCM Hammer thread at pcmhacking.net.
[02:24:32:673]  Starting verification...
[02:24:32:720]  Calculating CRCs from file...
[02:24:32:767]  Requesting CRCs from PCM...
[02:24:32:845]  	Range		File CRC		PCM CRC	Verdict	Purpose
[02:24:34:452]  0F0000-0FFFFF	8D0F8F91	8D0F8F91	Same	OperatingSystem
[02:24:36:043]  0E0000-0EFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[02:24:37:634]  0D0000-0DFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[02:24:39:225]  0C0000-0CFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[02:24:40:817]  0B0000-0BFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[02:24:42:408]  0A0000-0AFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[02:24:43:999]  090000-09FFFF	7DA5C19F	7DA5C19F	Same	OperatingSystem
[02:24:45:590]  080000-08FFFF	CDDEAE4C	CDDEAE4C	Same	OperatingSystem
[02:24:47:181]  070000-07FFFF	D006BDC7	D006BDC7	Same	OperatingSystem
[02:24:48:773]  060000-06FFFF	D2B04EC0	D2B04EC0	Same	OperatingSystem
[02:24:50:379]  050000-05FFFF	36511E94	36511E94	Same	OperatingSystem
[02:24:51:971]  040000-04FFFF	F6B0E81A	F6B0E81A	Same	OperatingSystem
[02:24:53:577]  030000-03FFFF	A97E3395	A97E3395	Same	OperatingSystem
[02:24:55:169]  020000-02FFFF	EE1B7BAD	EE1B7BAD	Same	OperatingSystem
[02:24:56:760]  010000-01FFFF	4783A472	4783A472	Same	Calibration
[02:24:58:367]  008000-00FFFF	B25006D0	B25006D0	Same	Calibration
[02:24:59:973]  006000-007FFF	A6EF94D6	A6EF94D6	Same	Parameter
[02:25:01:580]  004000-005FFF	85B5BB36	85B5BB36	Same	Parameter
[02:25:03:187]  000000-003FFF	AE42598F	AE42598F	Same	Boot
[02:25:03:218]  The contents of the file match the contents of the PCM.
[02:25:03:281]  Clearing trouble codes.
[02:25:03:858]  Clearing trouble codes.
[02:25:04:419]  Elapsed time 00:04:35.9800847

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Back to AVT 852 for second speed test

[02:37:47:821]  PCM Hammer 012
[02:37:48:023]  AVT 852 Reset OK
[02:37:48:039]  AVT Firmware 1.1
[02:37:52:766]  VIN: 1GNEK13Z34J235452
[02:37:52:860]  OS ID: 12587603
[02:37:52:938]  Calibration ID: 12587672
[02:37:53:031]  Hardware ID: 12583660
[02:37:53:187]  Serial Number: 1LA0PQL34037
[02:37:53:281]  Broad Cast Code: YFXL
[02:37:53:359]  MEC: 0

[02:38:20:581]  Querying operating system of current PCM.
[02:38:20:659]  OSID: 12587603
[02:38:20:815]  Unlock succeeded.
[02:38:20:893]  Attempting switch to VPW 4x
[02:38:20:924]  Module 0x10 (engine controller) has agreed to enter high-speed mode.
[02:38:23:982]  Uploading kernel to PCM.
[02:38:24:871]  Kernel upload 49% complete.
[02:38:25:744]  Kernel upload 100% complete.
[02:38:26:088]  Kernel Version: 010301BB
[02:38:26:088]  kernel uploaded to PCM succesfully. Requesting data...
[02:38:26:166]  Flash chip: AMD AM29F800BB, 1mb

[02:42:41:023]  Read complete.
[02:42:41:054]  All write-request messages succeeded on the first try. You have an excellent connection to the PCM.
[02:42:41:070]  We're not sure how much retrying is normal for a read operation on a 1024kb PCM.
[02:42:41:101]  Please help by sharing your results in the PCM Hammer thread at pcmhacking.net.
[02:42:41:117]  Starting verification...
[02:42:41:148]  Calculating CRCs from file...
[02:42:41:195]  Requesting CRCs from PCM...
[02:42:41:335]  	Range		File CRC		PCM CRC	Verdict	Purpose
[02:42:43:036]  0F0000-0FFFFF	8D0F8F91	8D0F8F91	Same	OperatingSystem
[02:42:44:736]  0E0000-0EFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[02:42:46:436]  0D0000-0DFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[02:42:48:137]  0C0000-0CFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[02:42:49:837]  0B0000-0BFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[02:42:51:538]  0A0000-0AFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[02:42:53:238]  090000-09FFFF	7DA5C19F	7DA5C19F	Same	OperatingSystem
[02:42:54:938]  080000-08FFFF	CDDEAE4C	CDDEAE4C	Same	OperatingSystem
[02:42:56:654]  070000-07FFFF	D006BDC7	D006BDC7	Same	OperatingSystem
[02:42:58:355]  060000-06FFFF	D2B04EC0	D2B04EC0	Same	OperatingSystem
[02:43:00:055]  050000-05FFFF	36511E94	36511E94	Same	OperatingSystem
[02:43:01:756]  040000-04FFFF	F6B0E81A	F6B0E81A	Same	OperatingSystem
[02:43:03:456]  030000-03FFFF	A97E3395	A97E3395	Same	OperatingSystem
[02:43:05:156]  020000-02FFFF	EE1B7BAD	EE1B7BAD	Same	OperatingSystem
[02:43:06:872]  010000-01FFFF	4783A472	4783A472	Same	Calibration
[02:43:08:573]  008000-00FFFF	B25006D0	B25006D0	Same	Calibration
[02:43:10:289]  006000-007FFF	CF97EB43	CF97EB43	Same	Parameter
[02:43:11:989]  004000-005FFF	85B5BB36	85B5BB36	Same	Parameter
[02:43:13:705]  000000-003FFF	AE42598F	AE42598F	Same	Boot
[02:43:13:799]  The contents of the file match the contents of the PCM.
[02:43:13:892]  Clearing trouble codes.
[02:43:15:577]  Clearing trouble codes.
[02:43:16:186]  Elapsed time 00:04:55.3709188

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Woah, what's this?  I got my J2534 working :)

[07:30:39:764]  PCM Hammer 012
[07:30:39:764]  Loaded DLL
[07:30:41:012]  Connected to Scantool
[07:30:41:027]  Battery Voltage is: 13.214
[07:30:50:387]  VIN: 1GNEK13Z34J235452
[07:30:50:434]  OS ID: 12587603
[07:30:50:481]  Calibration ID: 12587672
[07:30:50:528]  Hardware ID: 12583660
[07:30:50:746]  Serial Number: 1LA0PQL34037
[07:30:50:808]  Broad Cast Code: YFXL
[07:30:50:855]  MEC: 0

[07:31:50:400]  Querying operating system of current PCM.
[07:31:50:463]  OSID: 12587603
[07:31:50:712]  Unlock succeeded.
[07:31:50:775]  Attempting switch to VPW 4x
[07:31:50:853]  Module 0x10 (engine controller) has agreed to enter high-speed mode.
[07:31:55:299]  Uploading kernel to PCM.
[07:31:56:282]  Kernel upload 49% complete.
[07:31:57:218]  Kernel upload 100% complete.
[07:31:59:542]  Kernel Version: 010301BB
[07:31:59:542]  kernel uploaded to PCM succesfully. Requesting data...
[07:31:59:729]  Flash chip: AMD AM29F800BB, 1mb

[07:36:40:015]  Read complete.
[07:36:40:046]  All write-request messages succeeded on the first try. You have an excellent connection to the PCM.
[07:36:40:077]  We're not sure how much retrying is normal for a read operation on a 1024kb PCM.
[07:36:40:093]  Please help by sharing your results in the PCM Hammer thread at pcmhacking.net.
[07:36:40:124]  Starting verification...
[07:36:40:155]  Calculating CRCs from file...
[07:36:40:265]  Requesting CRCs from PCM...
[07:36:40:358]  	Range		File CRC		PCM CRC	Verdict	Purpose
[07:36:42:027]  0F0000-0FFFFF	8D0F8F91	8D0F8F91	Same	OperatingSystem
[07:36:43:665]  0E0000-0EFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[07:36:45:303]  0D0000-0DFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[07:36:46:957]  0C0000-0CFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[07:36:48:579]  0B0000-0BFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[07:36:50:217]  0A0000-0AFFFF	A50F3C90	A50F3C90	Same	OperatingSystem
[07:36:51:840]  090000-09FFFF	7DA5C19F	7DA5C19F	Same	OperatingSystem
[07:36:53:493]  080000-08FFFF	CDDEAE4C	CDDEAE4C	Same	OperatingSystem
[07:36:55:131]  070000-07FFFF	D006BDC7	D006BDC7	Same	OperatingSystem
[07:36:56:769]  060000-06FFFF	D2B04EC0	D2B04EC0	Same	OperatingSystem
[07:36:58:407]  050000-05FFFF	36511E94	36511E94	Same	OperatingSystem
[07:37:00:045]  040000-04FFFF	F6B0E81A	F6B0E81A	Same	OperatingSystem
[07:37:01:699]  030000-03FFFF	A97E3395	A97E3395	Same	OperatingSystem
[07:37:03:353]  020000-02FFFF	EE1B7BAD	EE1B7BAD	Same	OperatingSystem
[07:37:04:975]  010000-01FFFF	4783A472	4783A472	Same	Calibration
[07:37:06:629]  008000-00FFFF	B25006D0	B25006D0	Same	Calibration
[07:37:08:251]  006000-007FFF	DAB31E6B	DAB31E6B	Same	Parameter
[07:37:09:905]  004000-005FFF	85B5BB36	85B5BB36	Same	Parameter
[07:37:11:527]  000000-003FFF	AE42598F	AE42598F	Same	Boot
[07:37:11:558]  The contents of the file match the contents of the PCM.
[07:37:11:745]  Clearing trouble codes.
[07:37:12:931]  Clearing trouble codes.
[07:37:13:539]  Elapsed time 00:05:22.8269670

Re: PCM Hammer Release 012

Posted: Tue Apr 14, 2020 11:22 am
by Tazzi
@In-tech
Nice work! Make sure your nano is on the latest firmware as well. I noticed a nice speed bump when I did that.

Re: PCM Hammer Release 012

Posted: Tue Apr 14, 2020 11:56 am
by TE27Levin
Gampy's pcmhammer edit for my autel j2534 has cloned my pcm successfully. My escalade is driving with a pcm from a wrecked avalanche. Super awesome.

Re: PCM Hammer Release 012

Posted: Wed Apr 15, 2020 6:38 am
by Gampy
In-Tech,

Which VXDIAG j2534 did you get ??

I'm confused why there is different vehicle mfg ones, is the device specific to a vehicle mfg, or is that for the software that comes with it ??
All times are UTC+10:00
Page 9 of 10

Powered by phpBB® Forum Software © phpBB Limited