Re: PCM Hammer - new ls1 flash tool
Posted: Tue May 12, 2020 11:18 pm
Thanks to everyone who has worked on this. I've been trying to learn even a slight amount of this stuff and it isn't easy. I was able to successfully read my 2005 p59 OS 12606961 with both MDI and MDI 2. I have a couple files, one with it programmed as a Holden and one as GMT800(using HP). I've been using ghidra to try and decipher and find how It enables lean cruise but I think the lack of cpu32 support is holding me back. I found where the platform type is stored and multiple references pointing to it but I'm not confident enough to make the changes.
Anyways, If I'm able to make the changes is it safe to write to the p59? I see it says full write isn't supported but does that include any OS changes. Any advice on verifying the Checksum afterwards would be a real help also.
Thanks everyone!
Anyways, If I'm able to make the changes is it safe to write to the p59? I see it says full write isn't supported but does that include any OS changes. Any advice on verifying the Checksum afterwards would be a real help also.
Thanks everyone!