Page 10 of 19

Re: Delco probie

Posted: Sat Jul 10, 2010 8:58 am
by Holden202T
honestly if your looking at $75+ for a memcal then get one of VL400s realtime boards, yeah sure you pay a bit more for it but then you have everything you need to dod what you want now and if you want to go realtime then all you need is an aldl interface.

Re: Delco probie

Posted: Sat Jul 10, 2010 9:06 am
by Mamba
Thats right but I wasn't planning to purchase an ECM from the wreckers...and if you could have seen it...you wouldn't have wired it to a wheelbarrow..VL400 SVRAM board sounds and looks great....didn't want to be a pest and trying to find a less obtrusive way of doing things...but it is an option I am keeping open at the moment...

Re: Delco probie

Posted: Sun Jul 11, 2010 6:55 pm
by Mamba
Just been reading the thread regarding the placement of O2 sensors in the exhaust system before and after the cat....beyond the cat mostly due to adr requirements and emissions. The following is one of the links I have used in learning about EFI and engine management, probably fairly basic for most members but helpful for those trying to understand more about engine manement systems and sensors...

http://www.aa1car.com/library/o2sensor.htm

Cheers...

Re: Delco probie

Posted: Thu Jul 22, 2010 7:21 pm
by Mamba
Thanks to Dec_head, Holden202 and Delcowizid for the tips, hints and advice on the roof lining issue I had....fixed for the moment,used both bigger staples and spray adhesive around the edges...working well!! :D

Had a few problems during the week....extra body in the garage I could have done without...
100_1092.jpg
100_1092.jpg (61.9 KiB) Viewed 3575 times
The guy wasn't very helpful either!!....quick question..

with the two spark advance maps, how does the ECM know which one to use?? (both the same anyway but just curious :?: )

Re: Delco probie

Posted: Thu Jul 22, 2010 9:53 pm
by Holden202T
as i understand it, 0 knock = high octane map .... then the more it knocks the more it goes back to the low octane map .... but as you say if they are the same it does nothing ....

when i was running the 98 octane changed spark i was only running it in the high octane map with the low octane map having the stock numbers in it, so if i did get knock it could pull the timing back to 91 friendly and i just logged it to see where it was knocking and just slightly pulled the high octane map back in those areas.

nice pet you got there :wtf:

Re: Delco probie

Posted: Thu Jul 22, 2010 10:20 pm
by Dec_head
Like the gaurd dog :lol: ssssssssssssssssssssss would make a good car alarm

Re: Delco probie

Posted: Thu Jul 22, 2010 10:50 pm
by Holden202T
i dunno that it would be an alarm as such .... definately an anti theft device though.

Re: Delco probie

Posted: Thu Jul 22, 2010 10:52 pm
by Dec_head
Have to name it vats

Re: Delco probie

Posted: Fri Jul 23, 2010 6:32 pm
by Mamba
Thanks for the info guys…..as for the snake, I think he will have to be named….appears to have taken up residence nearby and visits frequently!! :shock: …luckily he seems friendly enough and keeps the four legged hors d’oeuvre under control….gets much closer to the car though and it will become the new security system.…so vats it is :D ....

Re: Delco probie

Posted: Fri Jul 23, 2010 6:46 pm
by Holden202T
a shot gun at close range will sort the snake out! :lol: