PCM Hammer P01 and P59 flash tool v015

[Gampy]

Actually, if you want you can add them to the P04 Support thread here: viewtopic.php?f=42&t=8138
Or your own thread, your choice.

-Enjoy

[MudDuck514]

Now, that I have the full information I can see this is a P04 PCM that is unrecognized by PCMHammer v021.

Please download this: Artifact Build, once downloaded, drag n drop it where you want to unzip it on the fly, adjust name accordingly in the Select Destination Dialog.

Open the folder, find PcmHammer.exe and double click on it ... This is a current TEST build!

-Enjoy

Hi Gampy,

The posted link shows a 404 error, so you may need to fix it.
ALSO, once I FOUND the proper page, there doesn't appear to be a "download" link. (unless I am BLIND!)

Mike

[antus]

Maybe the artifacts are only open to logged in users, or those who commit to the repo, not sure.

[Gampy]

MudDuck514,

Yup, unfortunately you need to be logged into Github, that bites!
I'll replace that link with an attachment ...

The PcmHacks_<sha> is a link, you have to click on it ...

Edit;
I have replaced the link with an attachment.

-Enjoy

[MudDuck514]

Thanks Gampy!
I was able to DL, and extract this with no trouble.

Mike

[Gampy]

MudDuck514,

To be clear, I was talking about the PcmHacks_<sha> link on Github, I know you know what a link on here is and you didn't need explaining!
However if you're not logged into Github it is nothing other then characters ...

-Enjoy

[MudDuck514]

MudDuck514,

To be clear, I was talking about the PcmHacks_<sha> link on Github, I know you know what a link on here is and you didn't need explaining!
However if you're not logged into Github it is nothing other then characters ...

-Enjoy

Gampy,
I understood about the github issue.
That being said, THIS is what I was referring to:

"Please download this Github artifact #36:
PCMHacks_c6bedea55a1143c4eff60c67334239b00f2613cf.zip <<< THIS is what I was able to use to DL the file as it no longer links to the github page that gave the 404 error.
(2.18 MiB) Downloaded 5 times"

Thanks again,
Mike

[Gampy]

Yes sir, I understood.

-Enjoy

[multitek]

hi, i have a problem trying to read my ecu
i use a VXDIAG pass thru cable and have communication with ecu and id
but when i try to read fails and says "unlock was not succesfull"
any idea what is the problem?
--------------------------------------------------
[08:04:31:189] Initializing J2534 Device
[08:04:31:193] Loaded DLL
[08:04:32:149] Connected to the device.
[08:04:32:175] Battery Voltage is: 14,085
[08:04:37:463] VIN: 5GTDN136X68316131
[08:04:37:515] OS ID: 12606370
[08:04:37:521] Hardware Type: P01_P59
[08:04:37:569] Calibration ID: 12606369
[08:04:57:787] Hardware ID query failed: Error
[08:04:57:928] Serial Number: 6112KH0GY
[08:04:57:974] Broad Cast Code: YNAZ
[08:04:58:010] MEC: 0
[08:05:11:492] Will save to C:\Users\Kogiot\Desktop\aaa.bin
[08:05:21:659] Querying operating system of current PCM.
[08:05:21:705] OSID: 12606370
[08:05:21:878] The PCM did not accept the key - too many attempts
[08:05:26:755] Unlock response truncated, expected 6 bytes, got 4 bytes.
[08:05:26:778] Unable to process unlock response.
[08:05:26:794] Unlock was not successful.

[antus]

I am not sure what version pcmhammer you are running, but you are posting in the v015 thread which does not support P12 which is the PCM type running the 12606370 OSID. It is using the P01/P59 unlock algorithm which is not correct for the P12 PCM, and then this version would not support it anyway at the next step. Use the latest release version instead. There may also be other problems.