VS-VY Enhanced Factory Bins

[delcowizzid]

Lean it out until it's pops and bangs once you hit the perfect fuel ratio it will be like gunshots haha

[The1]

Testing complete, ive moved new VX VY Flash pcm version to this main thread. Enjoy full 1650cylair tables. Thanks for everyones help.

[Rhysk94]

Testing complete, ive moved new VX VY Flash pcm version to this main thread. Enjoy full 1650cylair tables. Thanks for everyones help.

Currently on the dyno with a turbo VY, Using your most recent updated files. The maf MGC is pegged at 953, wont read past that. Have I missed something ?
Cheers

[VTXU8]

Testing complete, ive moved new VX VY Flash pcm version to this main thread. Enjoy full 1650cylair tables. Thanks for everyones help.

Any plans in the near future to upgrade VT V8 cylair max tables from 953 to 1650? I max it very early in the low rev range with the Supercharger.

[Wade]

Testing complete, ive moved new VX VY Flash pcm version to this main thread. Enjoy full 1650cylair tables. Thanks for everyones help.

Currently on the dyno with a turbo VY, Using your most recent updated files. The maf MGC is pegged at 953, wont read past that. Have I missed something ?
Cheers

what’s the gm sec? And how have you scaled the maf?

[Wade]

From my understanding you'll scale the maf based on the resolution you want. Then under Torque management, theres max airflow vs rpm in gm sec that the maf is allowed to read up to. The1 has increase that 256 limit up to what? 510/512 gm sec. If you look at the Buick GN tune its pretty much pegged at that 256 gm limit most of the way. Not sure if that's your problem? I did add this stuff into the description. So with a bit of luck you shouls be able to help confirm this?

[The1]

Testing complete, ive moved new VX VY Flash pcm version to this main thread. Enjoy full 1650cylair tables. Thanks for everyones help.

Currently on the dyno with a turbo VY, Using your most recent updated files. The maf MGC is pegged at 953, wont read past that. Have I missed something ?
Cheers

There's 2 items in adx, stock one upto 953 and second one that reads to 1650, check you have right one.

[Rhysk94]

Yeah I had the 0-1650 one selected. I wasn't aware of maf settings needing to be changed, next flash based pcm car I get in thats turbo I will try some of the maf tables, never personally messed with any of that.

[The1]

Should still get past that with stock tables, can you send me a log and bin to look at?

[Rhysk94]

Should still get past that with stock tables, can you send me a log and bin to look at?

Will do later on, just at the track with a customer at the moment. Appreciate your help