202 turbo
Re: 202 turbo
170 kpa is 25 psi right? thats alot of boost for the old girl maybe just wind that boost controller all the way out and i think it will see around 10 to 12 psi and the injectors might handle that. i didnt realize it was spiking so high.
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 202 turbo
100kpa is atmospheric pressure (1 bar, no boost) so 170 kpa of pressure is 70kpa of boost - 10psi. < 100kpa range is vaccume.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: 202 turbo
Yeah your right about them inj needing to be bigger before i can tune it anymore .I think ill have to get a wide band to .What wideband do you reckons the best delcowizzard.
Re: 202 turbo
delco wizzard what injectors are you running in that vb comm with the v6 turbo?
Re: 202 turbo
Also could you post the bin up ithat youve made for the vb for a look .
Re: 202 turbo
hes using siemens 60lb injectors.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: 202 turbo
i reckon your gonna want atleast 40lb injectors
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: 202 turbo
can anyone help me out with injectors for a good price by any chance?
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 202 turbo
As a starting point for price you can get 6 new siemens deka 60lb delivered for under $300au on ebay
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: 202 turbo
yeah i run 60lb seimens on everything now as for widebands i use 2 14point7.com widebands a NAW_7S and a SLC_DIY and i also have an innovate LM1 wideband and datalogger and fit egt's gauges similar to this in every turbo build mine was 65 bucks from china with sender so they are cheap enough i was going to use my own personal one and swap from car to car but this just speeds up tuning not having to fit it every time http://cgi.ebay.com.au/52mm-Race-tech-P ... 4aa77bf42a
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem