pcmhacking.net

Hi, can anyone tell me a site address for injector scaling (constant) for a VS manual V6 or has a good xdf file that works with this code.

Regards, Ez.

https://pcmhacking.net/forums/download/file.php?id=27 $51 XDF cant remember if it has the injector size in it orr not

https://pcmhacking.net/forums/viewtopi ... &t=5#p5588 and holden 202's thread with another

Thanks for the reply but have seen the post and used both xdfs with no luck as most of the stuff I want to use does not have the correct values in them. Do you know the site address for this one thing so I can finish tuning a vehicle with larger injectors?

Ez.

Injector Flow Rate - mS/Gram Of Fuel in top window is the only thing in $51 theres no table like a ve table as far as im aware to fine tune people have looked pretty much just have to use the MAF tables

yeah thats the getrag bin... most of the calibration items are offset from the earlier bins holden202's xdf is for, some items are up to 347 bytes out.

Not looking for a VE table or fuel table as such, just an address for the scaling.

Or could anyone tell me the value I should be looking for so I can find it myself.

is this any help ?

https://pcmhacking.net/forums/view ... tor#p10547

I beleive you need to be looking at the $51 variant F in that thread

For N/A $51 (Variant F) bins it is 2bytes at $4425/6 and the value should be $1CE8, conversions is X/20.48 = 7400/20.48 = 361.3 msec/gram.