Page 1 of 1
VY series 2 cross 8 tuning
Posted: Tue May 10, 2011 10:24 am
by jjg
Hello ALl
Newbie here , is this vehicle able to have the maps accessed (retuned)?
if so, could you direct me in the right direction please, I looked at the forum and couldnet find mention of it other then the vy V6
thank you in advance
JG
Re: VY series 2 cross 8 tuning
Posted: Tue May 10, 2011 10:36 am
by vn5000
If it has the LSX series engine then you can remove the flash chip and read/write it with a burner.
Other than that you willneed to spend quite a lot of money to buy efi live ,ls1 edit ,hp tuners or tuner cat .
Im thinking about connecting my ostrich to a flash chip socket which would allow real time tuning ,but an xdf will have to be developed first.
Re: VY series 2 cross 8 tuning
Posted: Tue May 10, 2011 11:13 am
by jjg
Thanks for that , some questions
" If it has the LSX series engine then you can remove the flash chip and read/write it with a burner."
Ok with this , how is the data than manipulated ?
the engine the 2004 build v8 which is the LS1 I think .
Re: VY series 2 cross 8 tuning
Posted: Tue May 10, 2011 11:34 am
by antus
The LS1s have flash memory meaning you can download and upload tunes with the right hardware and software (listed above). You would gather data driving around or on the dyno, edit the tune offline then send it to the car. Realtime is only possible with a modified ECU, such as the roadrunner from moates.
Re: VY series 2 cross 8 tuning
Posted: Thu May 12, 2011 8:50 pm
by TTVN
for editing you will probably need the efilive or hp tuners software which you get with the flash tuner tool
i have socketed a pcm for such occasions