Page 1 of 3

BCM Simulator

Posted: Wed May 11, 2011 10:45 pm
by VL400
Another early prototype I thought people might be interested in :think:

Its a BCM simulator for VR to VY engines when doing conversions - and it will be affordable! It links to VT and later PCMs and simulates a valid key for VR and VS to disable VATS, gives a CEL on VT and later, low speed fan for VS and later, A/C control and passes it to the PCM so it knows the request has come in on VT and later. On VT and later PCMs you can have a dash hooked up to the bus and it will work. Basically does all the BCM stuff thats engine related.
BCMSim.jpg
BCMSim.jpg (74.61 KiB) Viewed 9668 times



More to come :thumbup:

Re: BCM Simulator

Posted: Wed May 11, 2011 10:49 pm
by Holden202T
very keep to see some testing results on some different conversions, shame i don't still have the ecotec torana, was a small need for it on that to make things more "proper"

Re: BCM Simulator

Posted: Thu May 12, 2011 1:28 am
by delcowizzid
nice little unit bet this gets used lots will it make an 808 run a VT dash LOL

Re: BCM Simulator

Posted: Thu May 12, 2011 5:36 am
by yoda69
Very nice :thumbup:

Re: BCM Simulator

Posted: Thu May 12, 2011 9:30 am
by krusty
I'll take one, maybe two. I need to get $07 up and running on my VY L67 asap.

Geez there's some smart cookies around :punk:

Re: BCM Simulator

Posted: Thu May 12, 2011 9:48 am
by Holden202T
there sure is, and hes the chosen one, cause he can read the delco matrix fluently!!
vlcsnap-2011-05-12-09h46m30s150.png
vlcsnap-2011-05-12-09h46m30s150.png (264.42 KiB) Viewed 13379 times

Re: BCM Simulator

Posted: Thu May 12, 2011 10:41 am
by VL400
Not even Neo can read that matrix :shock:

Re: BCM Simulator

Posted: Thu May 12, 2011 11:13 am
by The1
to smart for class :geek:

Re: BCM Simulator

Posted: Thu May 12, 2011 8:04 pm
by ZacsV8
The world just keeps getting better... :thumbup:

Re: BCM Simulator

Posted: Sat May 21, 2011 2:03 pm
by VL400
Got some time to test out the BCM sim so thought some quick vids were in order :thumbup:

Linking a VY flash based PCM to allow a VATS locked PCM to work as if a valid key is being used. This is only done once to initially link the PCM and BCM sim. Red is power LED, yellow is data and green flashes once the linking is complete ...
Image



CEL controlled by the BCM sim on a VY flash PCM ...
Image



The sim also has all the usual bus chatter between the BCM and PCM, this means any TP ADX that looks for heartbeat and BCM chatter tool will work just like on a vehicle from the factory. It does not request data from the ABS or SRS systems.

Code: Select all

38:04.772: Com timeout: Expecting frame header byte
38:04.777: No chatter found
38:04.818: (38:04.802)$40,$58,$4D,$50,$52,$79
38:04.834: (38:04.820)$41,$68,$12,$00,$00,$00,$14,$00,$00,$00,$00,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$A4
38:04.866: (38:04.850)$11,$5C,$FF,$00,$00,$00,$10,$00,$00,$84
38:04.945: (38:04.929)$40,$58,$4D,$50,$52,$79
38:04.961: (38:04.948)$41,$68,$12,$00,$00,$00,$14,$00,$00,$00,$00,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$A4
38:04.977: (38:04.977)$08,$55,$A3
38:05.072: Com timeout: Expecting frame header byte
38:05.074: No chatter found
38:05.105: (38:05.105)$40,$58,$4D,$50,$52,$79
38:05.137: (38:05.109)$41,$68,$12,$00,$00,$00,$14,$00,$00,$00,$00,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$A4
38:05.169: (38:05.153)$11,$5C,$FF,$00,$00,$00,$10,$00,$00,$84
38:05.233: (38:05.233)$40,$58,$4D,$50,$52,$79
38:05.265: (38:05.249)$41,$68,$12,$00,$00,$00,$14,$00,$00,$00,$00,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$A4
38:05.281: (38:05.268)$08,$55,$A3
38:05.382: Com timeout: Expecting frame header byte
38:05.387: No chatter found
38:05.409: (38:05.409)$40,$58,$4D,$50,$52,$79
38:05.441: (38:05.413)$41,$68,$12,$00,$00,$00,$14,$00,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$A3
38:05.457: (38:05.457)$11,$5C,$FF,$00,$00,$00,$10,$00,$00,$84
38:05.537: (38:05.537)$40,$58,$4D,$50,$52,$79
38:05.569: (38:05.541)$41,$68,$12,$00,$00,$00,$14,$41,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$62
38:05.575: (38:05.575)$08,$55,$A3
38:05.672: Com timeout: Expecting frame header byte
38:05.678: No chatter found
38:05.713: (38:05.697)$40,$58,$4D,$50,$52,$79
38:05.729: (38:05.718)$41,$68,$12,$00,$00,$00,$14,$41,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$62
38:05.761: (38:05.745)$11,$5C,$FF,$00,$00,$00,$10,$00,$00,$84
38:05.841: (38:05.825)$40,$58,$4D,$50,$52,$79
38:05.873: (38:05.846)$41,$68,$12,$00,$00,$00,$14,$41,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$62
38:05.877: (38:05.877)$08,$55,$A3
38:05.972: Com timeout: Expecting frame header byte
38:05.978: No chatter found
38:06.001: (38:06.001)$40,$58,$4D,$50,$52,$79
38:06.033: (38:06.017)$41,$68,$12,$00,$00,$00,$14,$41,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$62
38:06.065: (38:06.049)$11,$5C,$FF,$00,$00,$00,$10,$00,$00,$84
38:06.145: (38:06.129)$40,$58,$4D,$50,$52,$79
38:06.161: (38:06.147)$41,$68,$12,$00,$00,$00,$14,$41,$00,$00,$01,$B8,$C5,$00,$00,$10,$00,$00,$00,$00,$00,$62
38:06.177: (38:06.177)$08,$55,$A3