pcmhacking.net

hi, just wondering if anyone has installed an msd 6a to a holden black 202 with delco before? i can't figure out how to hook the dizzy up to the msd, any help is much appreciated, thanks

Am using a MSD 6AL-2 with a delco, it might be a little different to the 6A though. Needed to keep the camira module connected to the dizzy reluctor signal, it controls cranking spark, the REF to ECU and EST from ECU. The MSD wires between the camira module coil output and the coil. The VR connections on the MSD were not used.

thanks, so if the vr wires are not used then do i use the white wire? and where to?

Yeah we used the white wire on a 6AL2, its connected to the coil output (the wire going to the coil negative) from the camira module.