pcmhacking.net

be careful what xdf you use... I used 11Bv105 for that file, and it appears fine.
you can get hte latest 11B xdf here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=5

I use the memcal ID tool to ID bins. works fairly well. http://pcmhacking.net/forums/viewtopic.php?f=3&t=905

Cheers Jayme.. appreciate the response..!!

I clearly have MUCH to learn

dose any one have a tune for a vn to suit a cam that is 230/230 @50

Hi Gents

After a bin for the Crow 4502 to suit a VR Auto.

edit: removed pic to keep thread clean and the following posts about it.

big cams wrote:dose any one have a tune for a vn to suit a cam that is 230/230 @50

Did you ever get your wideband working?
Your all but set up to do it yourself last time.

Please keep this thread on topic. Start another to discuss specific people or general topics.

Dylan wrote:

big cams wrote:dose any one have a tune for a vn to suit a cam that is 230/230 @50

Did you ever get your wideband working?
Your all but set up to do it yourself last time.

nar didn't know what yous ment so I didn't try didn't want to fri my car in case I do something wrong

jxx wrote:not sure what the vehicle was used for.

Was it a v6 tune mate?

i pulled this out of a vs v8 man. had a sticker on it saying Williams town bla bla. its 64k though. the chip was de soldered and re soldered back in and has the factory stocker removed.

It looks like a double stacked DLJX file that has some weird changes!