Page 1 of 1
Possible VSS For Cable Speedo Cpnversions
Posted: Thu Jun 04, 2009 2:24 am
by delcowizzid
well while researching for lada info for our french buddy I came accross this pic of the lada VSS for the delco ecu.and low and behold it has a cable output with a dust cap on it as well as the stock 3 wire pulse output setup .looks good for an easy swap for certian gearboxes with threaded speedo cable drives.availiabuility of the part is an unknown.
- PICT0041.jpg (157.8 KiB) Viewed 13234 times
Re: Possible VSS For Cable Speedo Cpnversions
Posted: Thu Jun 04, 2009 9:11 am
by Holden202T
degreaser ??
Re: Possible VSS For Cable Speedo Cpnversions
Posted: Fri May 02, 2014 8:36 pm
by Rock_Lobster
These are on Ebay. Just search for Lada Niva Speed Sensor.
I have ordered one from Russia. Will see what it fits.
Rock Lob
Re: Possible VSS For Cable Speedo Cpnversions
Posted: Fri May 02, 2014 9:00 pm
by vlad01
what about one of these?
Re: Possible VSS For Cable Speedo Cpnversions
Posted: Fri May 02, 2014 9:02 pm
by delcowizzid
price???
Re: Possible VSS For Cable Speedo Cpnversions
Posted: Fri May 02, 2014 9:29 pm
by vlad01
never bought one, google search came up with this one
http://www.quadratec.com/products/95202_000.htm
Re: Possible VSS For Cable Speedo Cpnversions
Posted: Sat May 03, 2014 7:16 pm
by Rock_Lobster
Looks higher quality than the Lada one. Then again, the Lada one was only $18 delivered.
Rock Lob
Re: Possible VSS For Cable Speedo Cpnversions
Posted: Sat May 03, 2014 8:57 pm
by Rock_Lobster
Here's a great source for VSS sensors that go between the gearbox and speedo cable, or splice into the speedo cable :-
http://www.brantz.co.uk/sensors.htm
Rock Lob
Re: Possible VSS For Cable Speedo Cpnversions
Posted: Mon Jul 07, 2014 2:54 pm
by Dazza92VP
found this might be good for anyone who cant hook into the cable for output
http://www.jegs.com/i/JEGS-Performance- ... Id=2461660