New To Site ( Looking for help)

[Tuf098]

Hey guys im new to this site. Been reading heaps on here and would like to know if anyone can help me with what i need to get started. I have a Vx supercharged, with boost upgrade, high ratio rockers, 1 3/4 Pacemakers , and full system. What do i need to buy to get online with it. I have a a past in tuning haltech, motec, autronic etc etc but delco is new to me. If someone could give me a quick run down would be great. cheers luke

[antus]

What is your 'boost ugrade'? Is the ECU running aftermarket software? If so, which one?

[Tuf098]

10 psi boost. computer is stock

[Jayme]

youll prob be feeling surges at wot where its pulling knock retard with that boost and rockers on a stock tune.

youve got a few options:
buy https://pcmhacking.net/forums/viewtopic.php?f=14&t=622 to scan and log with.

then for burning memcals you will need a eprom burner, willem gq-4x or similar.
to do realtime tuning on the fly, you can either buy a moates ostrich OR https://pcmhacking.net/forums/viewtopic.php?f=14&t=166

[Tuf098]

Cool. So if i bought a nvram i wont need a eprom burner is that correct. will just need a interface as well

[Jayme]

well....... I would get a burner no matter what. if your nvram goes corrupt for any reason, you cant fix it unless you have a burner to reburn the base program. dual power willems are cheaper than the gx-4x, but you need a parallel port and an o/s no later than xp.

[Tuf098]

oh ok. do u use tunerpro free download.

[VL400]

Yep I think most one here are using TunerPro RT - the free version works fine but its well worth the donation.

[Tuf098]

also how do i get my bin and xdf for my vehicle.

[VL400]

In the getting started guide under tuning there is a bit about XDFs and bins. Download the memcal ID tool as it has all the bins and XDFs. On your PCM there is a sticker with what memcal/bin you have, just match it up with whats in the ID tool.