Page 1 of 2
OPEL, Siemens PCM
Posted: Mon Aug 15, 2011 12:50 pm
by VX L67 Getrag
Hey All,
Just trying to identify where everything is for this bin to make an xdf, or does anyone know if there's any xdf's anywhere to work with?
The bin is off a 2001 Holden TS Astra with Z18XE Auto(it's on a siemens simtec 90 PCM), I'm not sure if I can do a read with TP but this read was with KWP2000 & then I guess I'll edit with TP & flash back in!
I would love to know where masks are especially they seem to be very sensitive with check light for them!
any advice appreciated
Cheers VX L67 Getrag
Re: it's not a delco, but hoping same stuff in same location
Posted: Mon Aug 15, 2011 2:56 pm
by ivanovbg
Siemens
Opel Sintec 90
CAO100D1.DAT
Cod prod: 6586115375
Num HW: S01001
Cod OMO: Z18XE
Num SW: 09158670
------------------------------
Cks: 85C7
Size: 24320 = 0x5F00
$00040-identifier
Re: it's not a delco, but hoping same stuff in same location
Posted: Mon Aug 15, 2011 3:10 pm
by VX L67 Getrag
LEGEND!
SO do you have an xdf with any parameters identified?
I'm hoping some something like egr enable temp & possibly the masks?
Thanks so much VX L67 Getrag
Re: it's not a delco, but hoping same stuff in same location
Posted: Mon Aug 15, 2011 3:24 pm
by antus
Can you not edit it with kwp2000? It lists Siemens Simtec90 based Astras in its supported list?
Re: OPEL, Siemens PCM
Posted: Mon Aug 15, 2011 3:29 pm
by VX L67 Getrag
O.k. started this thread in another heading, but didn't really want to as it's not a delco but did get a reply & found more information from that...
http://youyoukiller.free.fr/forum/forum ... 1&cit=2329
Does anybody know how to convert that thread into english as I think it may be related?
Re: it's not a delco, but hoping same stuff in same location
Posted: Mon Aug 15, 2011 3:31 pm
by VX L67 Getrag
Not with the kit I got!
All it does with what I've got is reads & writes, unless theres another better version out there?
Re: OPEL, Siemens PCM
Posted: Mon Aug 15, 2011 4:57 pm
by VL400
Merged the two threads
If this link does not work just paste the URL in to google and then click "translate this page" ..
http://translate.google.com.au/translat ... rmd%3Divns
Re: it's not a delco, but hoping same stuff in same location
Posted: Tue Aug 16, 2011 4:01 am
by ivanovbg
VX L67 Getrag wrote:LEGEND!
SO do you have an xdf with any parameters identified?
no,onli spark adwance table & fuel(VE) table]
Have you WinOls?
my English is Google
Re: OPEL, Siemens PCM
Posted: Tue Aug 16, 2011 7:30 am
by VX L67 Getrag
Thank you Ivanovbg,
Is there any chance I could have a look at that xdf & then I will try & add onto it from there?
Thanks too VL, it wasn't of much use though that link!
Cheers VX L67 Getrag
EDIT: I now have winOLS, but it's only the tester version so I can't do the check sum correction or I don't think it allows exporting of modified files?
Re: OPEL, Siemens PCM
Posted: Wed Aug 17, 2011 5:43 am
by ivanovbg