Trouble burning a bin
Posted: Mon Aug 15, 2011 10:35 pm
Having a few issues burning a particular bin.
It's a VS V8 auto realtime / wideband mod bin.
I have the offset right ( 64k bin ) so no offset needed on a VS Auto memcal
Just to make sure I didn't have a burning issue, I burnt a OSE bin to a spare memcal, no problems.
I have burnt it previously with no issues? Even tried a different memcal, same problem.
The bin was grabbed off the NVRAM via the flashtool. Even tried the origonal BWFU_Mod_Wideband bin and no go.
Any help with this one would be appreciated.
It's a VS V8 auto realtime / wideband mod bin.
I have the offset right ( 64k bin ) so no offset needed on a VS Auto memcal
Just to make sure I didn't have a burning issue, I burnt a OSE bin to a spare memcal, no problems.
I have burnt it previously with no issues? Even tried a different memcal, same problem.
The bin was grabbed off the NVRAM via the flashtool. Even tried the origonal BWFU_Mod_Wideband bin and no go.
Any help with this one would be appreciated.