Page 5 of 7
Re: VE Instrument Cluster EEPROM Programming
Posted: Fri Aug 25, 2017 5:44 pm
by julespatch
hey guys
thanks for all the great info. ive got a cluster here that i've read the eeprom on, changed the values and written back to the chip.. now i just want to power it on the bench to have a look but im going in circles trying to work out how to power it up.
what pins need to be connected? it's an aussie VE series 1 - 8184-26140-04 mainboard
cheers!
Re: VE Instrument Cluster EEPROM Programming
Posted: Sun Jan 20, 2019 11:28 pm
by pabxone
Here are a few VE Series 2 Cluster BIN files if anyone has a need for them.
Series 2 VDO / Continental BLACK back instrument clusters - It also "Appears" that some very late Series 1 VE's were fitted with the Black Back VDO / Continental Clusters.
All BIN files are as Downloaded from good working Clusters - The VIN numbers in the BINS have been deleted but the rest of the file is untouched.
ALL are programmed for 2012 VE SSV UTE , 6.0 Litre ( L77 LS3 ) , 6 Speed Manual ( TR6060 ) , Full Sat Nav ( All STD MY12.5 SSV Ute options )
Also as an FYI - Series 1 VE clusters when programmed with a Tech2 will work fine in a Series 2 VE , Only issue I've seen is with the Navigation Pop Ups in the Cluster the font's are not right in a Series 2 and size up funny and often with odd characters in the display - Other than that issue the Series 1 dash works fine in a Series 2 vehicle - I've used several Series 1 clusters in my car and all without any issues (AFTER they have been configured with a Tech 2 ) other than the NAV pop ups - If you don't have Sat Nav you won't see any issues.
Re: VE Instrument Cluster EEPROM Programming
Posted: Sun Mar 17, 2019 7:26 pm
by commodorenut
Hi Guys,
im chasing some VE Series 1 ( White back ) Cluster bin files from a ute and wagon.
Does anyone have any..
I have over 50 sedan ones, but no ute or wagon
I need to flash these onto a cluster so i can test my VE Canbus tool im making..
Re: VE Instrument Cluster EEPROM Programming
Posted: Sun Mar 17, 2019 9:14 pm
by pabxone
commodorenut wrote:Hi Guys,
im chasing some VE Series 1 ( White back ) Cluster bin files from a ute and wagon.
Does anyone have any.. .
Let me know what Engine / Drive train Etc options you want on it and I'll program up a Series 1 dash in the car and I'll extract a bin file for you.
Re: VE Instrument Cluster EEPROM Programming
Posted: Wed Sep 04, 2019 1:03 am
by raksau
I know its a bit of an older thread but i whipped up a quick app that will convert your decimal odometer reading to the hex value you require based on ZerOne's Calculations.
Re: VE Instrument Cluster EEPROM Programming
Posted: Sun May 17, 2020 12:40 pm
by mattyjf01
In all of the series 1 clusters that i've read, The value has been a division of 12.375
eg.
307700/12.375=24864.65
24865 dec2Hex => x06121
307700km
x06121
273301km
x05645
232792km
x0497c
79296km
x01908
- x07fff seems to follow odd numbers only
- calculator wont do over 300132km
Re: VE Instrument Cluster EEPROM Programming
Posted: Tue Jun 23, 2020 2:36 pm
by Tre-Cool
Rather then strip my dash just to get the wiring colours, does anyone have the pin location for earth/power so i can power up my old dash cluster to check the km's?
Re: VE Instrument Cluster EEPROM Programming
Posted: Tue Jun 23, 2020 9:24 pm
by mattyjf01
Ve series 2 odometer locations
x0008 - x0027
x00d4 - x00d5
Re: VE Instrument Cluster EEPROM Programming
Posted: Tue Jun 23, 2020 9:30 pm
by mattyjf01
Re: VE Instrument Cluster EEPROM Programming
Posted: Tue Jul 07, 2020 10:13 am
by coke40
Hi all has anyone been able to get Raksau VE OdoCalc to work i have no luck on win8 or win xp
Many Thanks