I am trying to make the vs bwcs tune hold gears when using the shifter and not change by itself.
Would i just set manual mode shift speed vs vkph vs tps values to 300 klms or more would it work or is their a better way to do it.
Full manual shift bwcs
Re: Full manual shift bwcs
hi, i have instructions on how to modify the trans itself for manual control.
email me if you want a copy.
mark
email me if you want a copy.
mark
Re: Full manual shift bwcs
Set your upshift and down shift values to very low numbers
1>2 = 1kph
2>3 = 3 kph
3>4 = 5kph
4>3 = 4kph
3>2 = 3kph
2>1 = 1kph
Set the value for all TPS values in each table.
This gives the box a way to come back to 1st when you come to a stop, but if you forget to manually select 1st when taking off it will jump back up the gears as soon as you start moving.
1>2 = 1kph
2>3 = 3 kph
3>4 = 5kph
4>3 = 4kph
3>2 = 3kph
2>1 = 1kph
Set the value for all TPS values in each table.
This gives the box a way to come back to 1st when you come to a stop, but if you forget to manually select 1st when taking off it will jump back up the gears as soon as you start moving.
-
- Posts: 199
- Joined: Wed Nov 09, 2011 5:35 pm
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Re: Full manual shift bwcs
Wouldnt the low up shift speed make it change as soon as you hit them speeds in manual mode?
Re: Full manual shift bwcs
no. the forced shift thresholds are set elsewhere.
you also need to turn off kickdown or itll still kick back when you stab it.
you also need to turn off kickdown or itll still kick back when you stab it.
-
- Posts: 199
- Joined: Wed Nov 09, 2011 5:35 pm
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Re: Full manual shift bwcs
Were do we find these? Cheers