Re: Flash PCM's Made realtime
Posted: Tue Nov 17, 2015 10:42 pm
i dont need any encouragement, i have plenty of that, time is what is my problem, when i started enhanced to where i am now i have a family and kids and fulltime overloaded job, so quite different now lol I can't speak for others on here but i suspect alot of the same.
I have thought about flash pcm's before but ended up with the fact there is no easy way a end user could install a nvram by themselves like a memcal based pcm, that and a few other reasons turned my time off this and kept doing things for the memcal based pcm's instead.
VT/VX/VY L67 and VT N/A all use the same pcm and near the same engine loom it's not hard to swap an engine loom and pcm over if you wish to have the code and tune ability. I had thought about doing a writeup on converting a VX/VY Flash to VX/VY Memcal PCM using a VT V6 Loom & PCM.
I have thought about flash pcm's before but ended up with the fact there is no easy way a end user could install a nvram by themselves like a memcal based pcm, that and a few other reasons turned my time off this and kept doing things for the memcal based pcm's instead.
VT/VX/VY L67 and VT N/A all use the same pcm and near the same engine loom it's not hard to swap an engine loom and pcm over if you wish to have the code and tune ability. I had thought about doing a writeup on converting a VX/VY Flash to VX/VY Memcal PCM using a VT V6 Loom & PCM.