Hi,
I have just fitted an NVRAM to my VT with a CJDN bin and the Engine Light is on with a Code 51?
Any pointers for a beginner on what to look for or what I have done wrong? I have checked that the NVRAM is sitting in its socket properly.
Thanks
Code 51
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Code 51
Are you using the CJDN real time enabled bin? https://pcmhacking.net/forums/viewtopic.php?f=27&t=613
It has the program ID set to AA to stop the code 51 when changes are made to the calibration, if your using a normal CJDN for testing will need to change the ID to AA.
It has the program ID set to AA to stop the code 51 when changes are made to the calibration, if your using a normal CJDN for testing will need to change the ID to AA.
Re: Code 51
Hi,
I have tried to use the realtime CJDN bin from the attachment but the tables are jumbled using the $A6C XDF.
What else do I nned to do?
Thanks
I have tried to use the realtime CJDN bin from the attachment but the tables are jumbled using the $A6C XDF.
What else do I nned to do?
Thanks
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Code 51
From the brief look I had (AFR, spark and some trans tables) it all looks ok, was using the A6C XDF in the memcal ID tool and the CJDN_mod.bin. Maybe download them again, something might be corrupt?