uv eraser
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: uv eraser
ive erased a good 1500-2000 eproms with my 15 dollar special like above on ebay just dont use the timer its like in hours not minutes LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: uv eraser
haha, plenty of life in it then!
Re: uv eraser
would the ango laga one be better or just a cheapo?
bout to buy one.
bout to buy one.
Re: uv eraser
cheapo works fine, but upto you
Re: uv eraser
got a cheapo on its way,cant go wrong i guess.
do they need an adaptor for aus 240v power point?
do they need an adaptor for aus 240v power point?
Re: uv eraser
mine did but came with one
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: uv eraser
mine i just wired on a new plug from jaycar
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: uv eraser
Ive got the same eraser been going for years now
how long do you guys leave you eproms under the uv light for as some of mine i put under for 20 25 mins and they still dont whipe blank 1st go
how long do you guys leave you eproms under the uv light for as some of mine i put under for 20 25 mins and they still dont whipe blank 1st go
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: uv eraser
They usually take 5-10 mins. If they dont erase in that it can be because of the angle the light is hitting the guts of the chip. Can turn it around or line it up better. If you can, get the light source square on to the face of the chip.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: uv eraser
thanks for the info, i removed my tray and place the chip / eprom part directly under the uv light
sometimes i thought it mighta been a little close to the light and that might be my problem
sometimes i thought it mighta been a little close to the light and that might be my problem