Weird Timing Values

[sparx-1]

Hi all, First i would like to congratulate all you guys for putting together all the software and files so i can have a play with my
engine makes me enjoy my car even more getting to know how its thinking when i push the go pedal

Vehicle details to date:
Holden 96 VS S pack Ute
Engine: Stock new crate engine VT 5.0L V8 (roller cam) apparently (195KW)
Engine Loom: VT SS V8 auto, modified and running
PCM from a VT auto SS (16234531) original memcal bin CJDN. now with a NVRAM conversion from VL400 running CNPJ RT mod bin, no BCM
Exhaust 1 5/8 tri y pacmakers into twin 2 1/5 system
Gearbox: 96 VS T5 5 speed manual

Its currently running on a nvram from vl400
CNPJ_mod.bin
VT V8 V1.2 $A6Evssandvatsdone.xdf
VT_$A6_v1.0.adx

I am only new to all this software and loving every minute of it.I went for a drive and took a log checking for knock
and I found that i am getting some weird values in the timing like some hex values.
Could some one have a look at the it below and point me in the right direction of how to get it to log numbers.

Spark Advance
Degrees
1F
16
15
18
1A
1A
1E
7
8
FFFFFFFE

1A
FFFFFFFF

[VL400]

If this is in the XDF right click the table and you can choose "Show Raw Hex" or "Show Calculated Values"

If its the ADX, which I think your actually asking about, its due to the ADX config being set to hex for spark advance. Attached is a fixed version, post back if it works or not so I can update the ADX thread with this version.

[sparx-1]

It was only happening in the .csv excel table when i exported a log file from tuner pro.
That updated VT_$A6_v1.01.adx file worked a treat thanks Vl400

[VL400]

Excellent, updated the ADX thread now