Page 1 of 1

Wanted tune for series 2 vn v6 to4 setup

Posted: Sun Jun 03, 2012 9:35 am
by CYCO-VS
Hi guys I recently purchased a turbo set up the guy gave me a 2bar and a tune to suit was done by a bloke in bendigo but he told me it can do with a retune as it was for a burnout car and has to much fuel screwed in just wondering if any body is able to check it out and clean it up also check the timing for me as well let me know guys what you can do cheers

Re: Wanted tune for series 2 vn v6 to4 setup

Posted: Sun Jun 03, 2012 10:50 am
by Holden202T
really you need a log or 4 with a wideband reading to get any real idea how its running

Re: Wanted tune for series 2 vn v6 to4 setup

Posted: Sun Jun 03, 2012 6:45 pm
by CYCO-VS
i just wont to have a safe tune done so i can get the car running then i will get the memcal retuned to full potential

Re: Wanted tune for series 2 vn v6 to4 setup

Posted: Sun Jun 03, 2012 7:18 pm
by Holden202T
it sounds to me like the tune you already have should be safe, if its got extra fuel in there the worst it will do is foul the plugs.

Re: Wanted tune for series 2 vn v6 to4 setup

Posted: Mon Jun 04, 2012 8:45 am
by Jayme
in my opinion, there is no such thing as a mail order safe turbo tune. there are that many combinations of piping, turbos, coolers, injectors, fuel pressures. not to mention little gremlins in the individual setups. a safe tune is one where the tuner can look at a wideband log of the car.

Re: Wanted tune for series 2 vn v6 to4 setup

Posted: Mon Jun 04, 2012 11:37 am
by kojab
Jayme I agree with you 100%